batch-example-2/plc/code/s5/sb-blocks.txt

2194 lines
80 KiB
Plaintext
Executable File
Raw Permalink Blame History

This file contains invisible Unicode characters

This file contains invisible Unicode characters that are indistinguishable to humans but may be processed differently by a computer. If you think that this is intentional, you can safely ignore this warning. Use the Escape button to reveal them.

SB 11 -SB11 IO HO501 FEED.H A1 C:ZONE10ST.S5D LEN=214
Page 1
Segment 1 Load inputs
:A -E 4.0=z10+b1.HO501-rfe
:AN -S 4.0=z10+b1.HO501-rfe
:= -ME22.1 DOSING UNIT ON
:
:A -E 6.2=z10+b1.HO500-fco
:AN -S 6.2=z10+b1.HO500-fco
:= -ME22.2 FREQ.CONV. READY
:
:A -E 5.0=z10+b1.HO501-vi:
:AN -S 5.0=z10+b1.HO501-vi:
:= -ME22.3 VIBRATOR ON
:
:A -M 0.1 CONSTANT 1
:= -ME23.1 BLOCK VALVE OPEN simulation
:A -M 0.2 CONSTANT 0
:= -ME23.3 INDICATOR FREE simulation
:A -E 18.2=z10+b1.HO501-ssw *(3) Safety switch
:AN -S 18.2=z10+b1.HO501-ssw *(3)
:= -ME23.2 SAFETY SWITCH OK *(3)
:***
I 4.0 = E 4.0=z10+b1.HO501-rfe rotary feeder on HO 501
S 4.0 = S 4.0=z10+b1.HO501-rfe rotary feeder on HO 501
F 22.1 = ME22.1 DOSING UNIT ON
I 6.2 = E 6.2=z10+b1.HO500-fco frequ.converter ready HO 500
S 6.2 = S 6.2=z10+b1.HO500-fco frequ.converter ready HO 500
F 22.2 = ME22.2 FREQ.CONV. READY
I 5.0 = E 5.0=z10+b1.HO501-vi: vibrator on HO 501
S 5.0 = S 5.0=z10+b1.HO501-vi: vibrator on HO 501
F 22.3 = ME22.3 VIBRATOR ON
F 0.1 = M 0.1 CONSTANT 1
F 23.1 = ME23.1 BLOCK VALVE OPEN
F 0.2 = M 0.2 CONSTANT 0
F 23.3 = ME23.3 INDICATOR FREE
I 18.2 = E 18.2=z10+b1.HO501-ssw safety switch ok HO 501
S 18.2 = S 18.2=z10+b1.HO501-ssw safety switch ok HO 501
F 23.2 = ME23.2 SAFETY SWITCH OK
Segment 2
:DOU -FX11 HO501 FEED. HO A1
Name :HOP-TYP1
SINR : KF +1
OFFS : KF +10
TIM1 : KF +20
TIM2 : KF +21
TIM3 : KF +22
TIM4 : KF +23
:***
FX 11 = FX11 HO501 FEED. HO A1 HO501 area 1: feeding hopper
Segment 3 Write outputs
:A -MA20.1 DOSING UNIT ON
:AN -S 4.0=z10+b1.HO501-rfe
:= -A 4.0=z10+b1.HO501-rfe
:
:A -MA20.3 VIBRATOR ON
:AN -S 5.0=z10+b1.HO501-vi:
:= -A 5.0=z10+b1.HO501-vi:
:
:A -MA21.2 POCKET PURGING
:= -A 16.4=z10+b1.HO501-ppu
SB 11 -SB11 IO HO501 FEED.H A1 C:ZONE10ST.S5D LEN=214
Page 2
: *(3) Air purged seals
:A -MA21.3 AIR PURGED SEALS *(3)
:= -A 16.5=z10+b1.HO501-aps *(3)
:***
F 20.1 = MA20.1 DOSING UNIT ON
S 4.0 = S 4.0=z10+b1.HO501-rfe rotary feeder on HO 501
Q 4.0 = A 4.0=z10+b1.HO501-rfe rotary feeder on HO 501
F 20.3 = MA20.3 VIBRATOR ON
S 5.0 = S 5.0=z10+b1.HO501-vi: vibrator on HO 501
Q 5.0 = A 5.0=z10+b1.HO501-vi: vibrator on HO 501
F 21.2 = MA21.2 POCKET PURGING
Q 16.4 = A 16.4=z10+b1.HO501-ppu pocket purging on HO 501
F 21.3 = MA21.3 AIR PURGED SEALS
Q 16.5 = A 16.5=z10+b1.HO501-aps air purged seals on HO 501
Segment 4 FiFo - Parameter
:CX -DX11 HO501 FEED. HO A1
:
:L KF +240
:T -MW180 PARAMETER 1 FiFo - DB
:
:L KF +0
:T -MW182 PARAMETER 2 FiFo - Output
:
:L KF +66
:T -MW184 PARAMETER 3 FiFo - Request
:
:L KF +1
:T -MW186 DW_ADDRESS Hopper No.
:***
FW 180 = MW180 PARAMETER 1
FW 182 = MW182 PARAMETER 2
FW 184 = MW184 PARAMETER 3
FW 186 = MW186 DW_ADDRESS
DX 11 = DX11 HO501 FEED. HO A1 HO501 area 1: feeding hopper
Segment 5 Addition - FiFo / Request
:L -MW176 ACT.NO. ADD.-FIFO
:L -MW186 DW_ADDRESS Hopper No.
:><F
:A(
:L DW 6 01 filling release
:L KF +1 01
:!=F 01
:) 01
:JC -FB136 ASSIGN DATABIT
Name :DBIT-ZUW
DB : -MW180 PARAMETER 1 FiFo - DB
DW : -MW184 PARAMETER 3 FiFo - Request
BIT : -MW186 DW_ADDRESS Hopper No.
WERT : -M 0.1 CONSTANT 1
DBDX : KS DB
:***
FW 176 = MW176 ACT.NO. ADD.-FIFO
FW 186 = MW186 DW_ADDRESS
FW 180 = MW180 PARAMETER 1
FW 184 = MW184 PARAMETER 3
F 0.1 = M 0.1 CONSTANT 1
FB 136 = FB136 ASSIGN DATABIT
SB 11 -SB11 IO HO501 FEED.H A1 C:ZONE10ST.S5D LEN=214
Page 3
Segment 6 Addition - FiFo / Delete Request
:L -MW176 ACT.NO. ADD.-FIFO
:L -MW186 DW_ADDRESS
:><F
:A(
:L DW 6 01 filling release
:L KF +1 01
:><F 01
:) 01
:JC -FB136 ASSIGN DATABIT
Name :DBIT-ZUW
DB : -MW180 PARAMETER 1 FiFo - DB
DW : -MW184 PARAMETER 3 FiFo - Request
BIT : -MW186 DW_ADDRESS Hopper No.
WERT : -M 0.2 CONSTANT 0
DBDX : KS DB
:***
FW 176 = MW176 ACT.NO. ADD.-FIFO
FW 186 = MW186 DW_ADDRESS
FW 180 = MW180 PARAMETER 1
FW 184 = MW184 PARAMETER 3
F 0.2 = M 0.2 CONSTANT 0
FB 136 = FB136 ASSIGN DATABIT
Segment 7 Addition - FiFo / Release
:L -MW176 ACT.NO. ADD.-FIFO
:L -MW186 DW_ADDRESS Hopper No.
:!=F
:A(
:L DW 6 01 filling release
:L KF +1 01
:><F 01
:) 01
:JC -FB176 STORE DW INDIR.
Name :TANS DW
DB : -MW180 PARAMETER 1 FiFo - DB
DW : -MW182 PARAMETER 2 FiFo - Output
WERT : -MW182 PARAMETER 2 Wert=0 => delete FiFo - Output
DBDX : KS DB
:***
FW 176 = MW176 ACT.NO. ADD.-FIFO
FW 186 = MW186 DW_ADDRESS
FW 180 = MW180 PARAMETER 1
FW 182 = MW182 PARAMETER 2
FB 176 = FB176 STORE DW INDIR. sp
Segment 8 unlock lid filling
:L -MW176 ACT.NO. ADD.-FIFO
:L -MW186 DW_ADDRESS Hopper No.
:!=F
:A(
:L DW 6 01 filling release
:L KF +1 01
:!=F 01
:) 01
:A -E 18.3=z10+b1.HO502-lid
:A -E 18.6=z10+b1.HO503-lid
:AN -A 15.7=z10+b1.HO504-lod
:A -E 19.1=z10+b1.HO504-lid
:= F 200.0 unlock lid filling
SB 11 -SB11 IO HO501 FEED.H A1 C:ZONE10ST.S5D LEN=214
Page 4
:***
FW 176 = MW176 ACT.NO. ADD.-FIFO
FW 186 = MW186 DW_ADDRESS
I 18.3 = E 18.3=z10+b1.HO502-lid lid closed HO 502
I 18.6 = E 18.6=z10+b1.HO503-lid lid closed HO 503
Q 15.7 = A 15.7=z10+b1.HO504-lod locking device release HO 504
I 19.1 = E 19.1=z10+b1.HO504-lid lid closed HO 504
Segment 9 unlock lid
:A F 200.0 unlock lid filling
:A -E 18.0=z10+b1.HO501-lid
:AN -E 13.4=z10+b1.HO502-exf
:A -E 17.4=z10+b1.HO502-exf
:AN -S 13.4=z10+b1.HO502-exf
:AN -S 17.4=z10+b1.HO502-exf
:AN -E 13.5=z10+b1.HO503-exf
:A -E 17.5=z10+b1.HO503-exf
:AN -S 13.5=z10+b1.HO503-exf
:AN -S 17.5=z10+b1.HO503-exf
:AN -E 13.6=z10+b1.HO504-exf
:A -E 17.6=z10+b1.HO504-exf
:AN -S 13.6=z10+b1.HO504-exf
:AN -S 17.6=z10+b1.HO504-exf
:= -A 15.4=z10+b1.HO501-lod
:***
I 18.0 = E 18.0=z10+b1.HO501-lid lid closed HO 501
I 13.4 = E 13.4=z10+b1.HO502-exf exhaustflap open HO 502
I 17.4 = E 17.4=z10+b1.HO502-exf exhaustflap closed HO 502
S 13.4 = S 13.4=z10+b1.HO502-exf exhaustflap open HO 502
S 17.4 = S 17.4=z10+b1.HO502-exf exhaustflap closed HO 502
I 13.5 = E 13.5=z10+b1.HO503-exf exhaustflap open HO 503
I 17.5 = E 17.5=z10+b1.HO503-exf exhaustflap closed HO 503
S 13.5 = S 13.5=z10+b1.HO503-exf exhaustflap open HO 503
S 17.5 = S 17.5=z10+b1.HO503-exf exhaustflap closed HO 503
I 13.6 = E 13.6=z10+b1.HO504-exf exhaustflap open HO 504
I 17.6 = E 17.6=z10+b1.HO504-exf exhaustflap closed HO 504
S 13.6 = S 13.6=z10+b1.HO504-exf exhaustflap open HO 504
S 17.6 = S 17.6=z10+b1.HO504-exf exhaustflap closed HO 504
Q 15.4 = A 15.4=z10+b1.HO501-lod locking device release HO 501
Segment 10 exhaust flap
:AN -E 18.0=z10+b1.HO501-lid
:A -E 18.3=z10+b1.HO502-lid
:A -E 18.6=z10+b1.HO503-lid
:A -E 19.1=z10+b1.HO504-lid
:AN -E 13.4=z10+b1.HO502-exf
:A -E 17.4=z10+b1.HO502-exf
:AN -S 13.4=z10+b1.HO502-exf
:AN -S 17.4=z10+b1.HO502-exf
:AN -E 13.5=z10+b1.HO503-exf
:A -E 17.5=z10+b1.HO503-exf
:AN -S 13.5=z10+b1.HO503-exf
:AN -S 17.5=z10+b1.HO503-exf
:AN -E 13.6=z10+b1.HO504-exf
:A -E 17.6=z10+b1.HO504-exf
:AN -S 13.6=z10+b1.HO504-exf
:AN -S 17.6=z10+b1.HO504-exf
:= -A 13.3=z10+b1.HO501-exf
:***
I 18.0 = E 18.0=z10+b1.HO501-lid lid closed HO 501
I 18.3 = E 18.3=z10+b1.HO502-lid lid closed HO 502
SB 11 -SB11 IO HO501 FEED.H A1 C:ZONE10ST.S5D LEN=214
Page 5
I 18.6 = E 18.6=z10+b1.HO503-lid lid closed HO 503
I 19.1 = E 19.1=z10+b1.HO504-lid lid closed HO 504
I 13.4 = E 13.4=z10+b1.HO502-exf exhaustflap open HO 502
I 17.4 = E 17.4=z10+b1.HO502-exf exhaustflap closed HO 502
S 13.4 = S 13.4=z10+b1.HO502-exf exhaustflap open HO 502
S 17.4 = S 17.4=z10+b1.HO502-exf exhaustflap closed HO 502
I 13.5 = E 13.5=z10+b1.HO503-exf exhaustflap open HO 503
I 17.5 = E 17.5=z10+b1.HO503-exf exhaustflap closed HO 503
S 13.5 = S 13.5=z10+b1.HO503-exf exhaustflap open HO 503
S 17.5 = S 17.5=z10+b1.HO503-exf exhaustflap closed HO 503
I 13.6 = E 13.6=z10+b1.HO504-exf exhaustflap open HO 504
I 17.6 = E 17.6=z10+b1.HO504-exf exhaustflap closed HO 504
S 13.6 = S 13.6=z10+b1.HO504-exf exhaustflap open HO 504
S 17.6 = S 17.6=z10+b1.HO504-exf exhaustflap closed HO 504
Q 13.3 = A 13.3=z10+b1.HO501-exf exhaustflap open HO 501
Segment 11 manual addition permitted
:AN -E 18.0=z10+b1.HO501-lid
:AN F 200.0 unlock lid filling
:A -M 0.4 FLASH CLOCK FAST
:O F 200.0 unlock lid filling
:O -M 4.5 GLOBAL LAMBTEST
:= -A 21.0=z10+b1.HO501-mad
:***
I 18.0 = E 18.0=z10+b1.HO501-lid lid closed HO 501
F 0.4 = M 0.4 FLASH CLOCK FAST
F 4.5 = M 4.5 GLOBAL LAMBTEST
Q 21.0 = A 21.0=z10+b1.HO501-mad manual addittion permitted HO 501
Segment 12 Refill HO501 *(7)
:A -MA20.2 FREQ.CONV. REL.
:A -MA20.1 DOSING UNIT ON
:A -E 18.1=z10+b1.HO501-llp *(7) Total network inserted !
:L KT 010.2
:SD -T22 HO501 reserve
:
:C -DB101 SCALE 01 (WORK)
:A D 203.6 Abort Komponent
:A D 140.8 Dosing timeout
:A -T22 HO501 reserve
:CX -DX11 HO501 FEED. HO A1
:S D 7.0 refill HO501
:
:AN -E 18.1=z10+b1.HO501-llp
:R D 7.0 refill HO501
:BE
F 20.2 = MA20.2 FREQ.CONV. REL. *** not used
F 20.1 = MA20.1 DOSING UNIT ON
I 18.1 = E 18.1=z10+b1.HO501-llp low level probe free HO 501
T 22 = T22 HO501 reserve
DB 101 = DB101 SCALE 01 (WORK) working DB plc scale RAM
DX 11 = DX11 HO501 FEED. HO A1 HO501 area 1: feeding hopper
SB 12 -SB12 IO HO502 FEED.H A1 C:ZONE10ST.S5D LEN=208
Page 1
Segment 1 Load inputs
:A -E 4.1=z10+b1.HO502-rfe
:AN -S 4.1=z10+b1.HO502-rfe
:= -ME22.1 DOSING UNIT ON
:
:A -E 6.2=z10+b1.HO500-fco
:AN -S 6.2=z10+b1.HO500-fco
:= -ME22.2 FREQ.CONV. READY
:
:A -E 5.1=z10+b1.HO502-vi:
:AN -S 5.1=z10+b1.HO502-vi:
:= -ME22.3 VIBRATOR ON
:
:A -M 0.1 CONSTANT 1
:= -ME23.1 BLOCK VALVE OPEN simulation
:A -M 0.2 CONSTANT 0
:= -ME23.3 INDICATOR FREE simulation
:A -E 18.5=z10.b1.HO503-ssw *(3) Safety switch
:AN -S 18.5=z10+b1.HO502-ssw *(3)
:= -ME23.2 SAFETY SWITCH OK *(3)
:***
I 4.1 = E 4.1=z10+b1.HO502-rfe rotary feeder on HO 502
S 4.1 = S 4.1=z10+b1.HO502-rfe rotary feeder on HO 502
F 22.1 = ME22.1 DOSING UNIT ON
I 6.2 = E 6.2=z10+b1.HO500-fco frequ.converter ready HO 500
S 6.2 = S 6.2=z10+b1.HO500-fco frequ.converter ready HO 500
F 22.2 = ME22.2 FREQ.CONV. READY
I 5.1 = E 5.1=z10+b1.HO502-vi: vibrator on HO 502
S 5.1 = S 5.1=z10+b1.HO502-vi: vibrator on HO 502
F 22.3 = ME22.3 VIBRATOR ON
F 0.1 = M 0.1 CONSTANT 1
F 23.1 = ME23.1 BLOCK VALVE OPEN
F 0.2 = M 0.2 CONSTANT 0
F 23.3 = ME23.3 INDICATOR FREE
I 18.5 = E 18.5=z10.b1.HO503-ssw safety switch ok HO 502
S 18.5 = S 18.5=z10+b1.HO502-ssw safety switch ok HO 502
F 23.2 = ME23.2 SAFETY SWITCH OK
Segment 2
:DOU -FX12 HO502 FEED. HO A1
Name :HOP-TYP1
SINR : KF +2
OFFS : KF +10
TIM1 : KF +24
TIM2 : KF +25
TIM3 : KF +26
TIM4 : KF +27
:***
FX 12 = FX12 HO502 FEED. HO A1 HO502 area 1: feeding hopper
Segment 3 Write outputs
:A -MA20.1 DOSING UNIT ON
:AN -S 4.1=z10+b1.HO502-rfe
:= -A 4.1=z10+b1.HO502-rfe
:
:A -MA20.3 VIBRATOR ON
:AN -S 5.1=z10+b1.HO502-vi:
:= -A 5.1=z10+b1.HO502-vi:
:***
F 20.1 = MA20.1 DOSING UNIT ON
SB 12 -SB12 IO HO502 FEED.H A1 C:ZONE10ST.S5D LEN=208
Page 2
S 4.1 = S 4.1=z10+b1.HO502-rfe rotary feeder on HO 502
Q 4.1 = A 4.1=z10+b1.HO502-rfe rotary feeder on HO 502
F 20.3 = MA20.3 VIBRATOR ON
S 5.1 = S 5.1=z10+b1.HO502-vi: vibrator on HO 502
Q 5.1 = A 5.1=z10+b1.HO502-vi: vibrator on HO 502
Segment 4 FiFo - Parameter
:CX -DX12 HO502 FEED. HO A1
:
:L KF +240
:T -MW180 PARAMETER 1 FiFo - DB
:
:L KF +0
:T -MW182 PARAMETER 2 FiFo - Output
:
:L KF +66
:T -MW184 PARAMETER 3 FiFo - Request
:
:L KF +2
:T -MW186 DW_ADDRESS Hopper No.
:***
FW 180 = MW180 PARAMETER 1
FW 182 = MW182 PARAMETER 2
FW 184 = MW184 PARAMETER 3
FW 186 = MW186 DW_ADDRESS
DX 12 = DX12 HO502 FEED. HO A1 HO502 area 1: feeding hopper
Segment 5 Addition - FiFo / Request
:L -MW176 ACT.NO. ADD.-FIFO
:L -MW186 DW_ADDRESS Hopper No.
:><F
:A(
:L DW 6 01 filling release
:L KF +1 01
:!=F 01
:) 01
:JC -FB136 ASSIGN DATABIT
Name :DBIT-ZUW
DB : -MW180 PARAMETER 1 FiFo - DB
DW : -MW184 PARAMETER 3 FiFo - Request
BIT : -MW186 DW_ADDRESS Hopper No.
WERT : -M 0.1 CONSTANT 1
DBDX : KS DB
:***
FW 176 = MW176 ACT.NO. ADD.-FIFO
FW 186 = MW186 DW_ADDRESS
FW 180 = MW180 PARAMETER 1
FW 184 = MW184 PARAMETER 3
F 0.1 = M 0.1 CONSTANT 1
FB 136 = FB136 ASSIGN DATABIT
Segment 6 Addition - FiFo / Delete Request
:L -MW176 ACT.NO. ADD.-FIFO
:L -MW186 DW_ADDRESS Hopper No.
:><F
:A(
:L DW 6 01 filling release
:L KF +1 01
:><F 01
:) 01
SB 12 -SB12 IO HO502 FEED.H A1 C:ZONE10ST.S5D LEN=208
Page 3
:JC -FB136 ASSIGN DATABIT
Name :DBIT-ZUW
DB : -MW180 PARAMETER 1 FiFo - DB
DW : -MW184 PARAMETER 3 FiFo - Request
BIT : -MW186 DW_ADDRESS Hopper No.
WERT : -M 0.2 CONSTANT 0
DBDX : KS DB
:***
FW 176 = MW176 ACT.NO. ADD.-FIFO
FW 186 = MW186 DW_ADDRESS
FW 180 = MW180 PARAMETER 1
FW 184 = MW184 PARAMETER 3
F 0.2 = M 0.2 CONSTANT 0
FB 136 = FB136 ASSIGN DATABIT
Segment 7 Addition - FiFo / Release
:L -MW176 ACT.NO. ADD.-FIFO
:L -MW186 DW_ADDRESS Hopper No.
:!=F
:A(
:L DW 6 01 filling release
:L KF +1 01
:><F 01
:) 01
:JC -FB176 STORE DW INDIR.
Name :TANS DW
DB : -MW180 PARAMETER 1 FiFo - DB
DW : -MW182 PARAMETER 2 FiFo - Output
WERT : -MW182 PARAMETER 2 Wert=0 => delete FiFo - Output
DBDX : KS DB
:***
FW 176 = MW176 ACT.NO. ADD.-FIFO
FW 186 = MW186 DW_ADDRESS
FW 180 = MW180 PARAMETER 1
FW 182 = MW182 PARAMETER 2
FB 176 = FB176 STORE DW INDIR. sp
Segment 8 unlock lid filling
:L -MW176 ACT.NO. ADD.-FIFO
:L -MW186 DW_ADDRESS Hopper No.
:!=F
:A(
:L DW 6 01 filling release
:L KF +1 01
:!=F 01
:) 01
:A -E 18.0=z10+b1.HO501-lid
:A -E 18.6=z10+b1.HO503-lid
:AN -A 15.7=z10+b1.HO504-lod
:A -E 19.1=z10+b1.HO504-lid
:= F 200.0 unlock lid filling
:***
FW 176 = MW176 ACT.NO. ADD.-FIFO
FW 186 = MW186 DW_ADDRESS
I 18.0 = E 18.0=z10+b1.HO501-lid lid closed HO 501
I 18.6 = E 18.6=z10+b1.HO503-lid lid closed HO 503
Q 15.7 = A 15.7=z10+b1.HO504-lod locking device release HO 504
I 19.1 = E 19.1=z10+b1.HO504-lid lid closed HO 504
SB 12 -SB12 IO HO502 FEED.H A1 C:ZONE10ST.S5D LEN=208
Page 4
Segment 9 unlock lid
:A F 200.0 unlock lid filling
:A -E 18.3=z10+b1.HO502-lid
:AN -E 13.3=z10+b1.HO501-exf
:A -E 17.3=z10+b1.HO501-exf
:AN -S 13.3=z10+b1.HO501-exf
:AN -S 17.3=z10+b1.HO501-exf
:AN -E 13.5=z10+b1.HO503-exf
:A -E 17.5=z10+b1.HO503-exf
:AN -S 13.5=z10+b1.HO503-exf
:AN -S 17.5=z10+b1.HO503-exf
:AN -E 13.6=z10+b1.HO504-exf
:A -E 17.6=z10+b1.HO504-exf
:AN -S 13.6=z10+b1.HO504-exf
:AN -S 17.6=z10+b1.HO504-exf
:= -A 15.5=z10+b1.HO502-lod
:***
I 18.3 = E 18.3=z10+b1.HO502-lid lid closed HO 502
I 13.3 = E 13.3=z10+b1.HO501-exf exhaustflap open HO 501
I 17.3 = E 17.3=z10+b1.HO501-exf exhaustflap closed HO 501
S 13.3 = S 13.3=z10+b1.HO501-exf exhaustflap open HO 501
S 17.3 = S 17.3=z10+b1.HO501-exf exhaustflap closed HO 501
I 13.5 = E 13.5=z10+b1.HO503-exf exhaustflap open HO 503
I 17.5 = E 17.5=z10+b1.HO503-exf exhaustflap closed HO 503
S 13.5 = S 13.5=z10+b1.HO503-exf exhaustflap open HO 503
S 17.5 = S 17.5=z10+b1.HO503-exf exhaustflap closed HO 503
I 13.6 = E 13.6=z10+b1.HO504-exf exhaustflap open HO 504
I 17.6 = E 17.6=z10+b1.HO504-exf exhaustflap closed HO 504
S 13.6 = S 13.6=z10+b1.HO504-exf exhaustflap open HO 504
S 17.6 = S 17.6=z10+b1.HO504-exf exhaustflap closed HO 504
Q 15.5 = A 15.5=z10+b1.HO502-lod locking device release HO 502
Segment 10 exhaust flap
:A -E 18.0=z10+b1.HO501-lid
:AN -E 18.3=z10+b1.HO502-lid
:A -E 18.6=z10+b1.HO503-lid
:A -E 19.1=z10+b1.HO504-lid
:AN -E 13.3=z10+b1.HO501-exf
:A -E 17.3=z10+b1.HO501-exf
:AN -S 13.3=z10+b1.HO501-exf
:AN -S 17.3=z10+b1.HO501-exf
:AN -E 13.5=z10+b1.HO503-exf
:A -E 17.5=z10+b1.HO503-exf
:AN -S 13.5=z10+b1.HO503-exf
:AN -S 17.5=z10+b1.HO503-exf
:AN -E 13.6=z10+b1.HO504-exf
:A -E 17.6=z10+b1.HO504-exf
:AN -S 13.6=z10+b1.HO504-exf
:AN -S 17.6=z10+b1.HO504-exf
:= -A 13.4=z10+b1.HO502-exf
:***
I 18.0 = E 18.0=z10+b1.HO501-lid lid closed HO 501
I 18.3 = E 18.3=z10+b1.HO502-lid lid closed HO 502
I 18.6 = E 18.6=z10+b1.HO503-lid lid closed HO 503
I 19.1 = E 19.1=z10+b1.HO504-lid lid closed HO 504
I 13.3 = E 13.3=z10+b1.HO501-exf exhaustflap open HO 501
I 17.3 = E 17.3=z10+b1.HO501-exf exhaustflap closed HO 501
S 13.3 = S 13.3=z10+b1.HO501-exf exhaustflap open HO 501
S 17.3 = S 17.3=z10+b1.HO501-exf exhaustflap closed HO 501
I 13.5 = E 13.5=z10+b1.HO503-exf exhaustflap open HO 503
I 17.5 = E 17.5=z10+b1.HO503-exf exhaustflap closed HO 503
S 13.5 = S 13.5=z10+b1.HO503-exf exhaustflap open HO 503
SB 12 -SB12 IO HO502 FEED.H A1 C:ZONE10ST.S5D LEN=208
Page 5
S 17.5 = S 17.5=z10+b1.HO503-exf exhaustflap closed HO 503
I 13.6 = E 13.6=z10+b1.HO504-exf exhaustflap open HO 504
I 17.6 = E 17.6=z10+b1.HO504-exf exhaustflap closed HO 504
S 13.6 = S 13.6=z10+b1.HO504-exf exhaustflap open HO 504
S 17.6 = S 17.6=z10+b1.HO504-exf exhaustflap closed HO 504
Q 13.4 = A 13.4=z10+b1.HO502-exf exhaustflap open HO 502
Segment 11 manual addition permitted
:AN -E 18.3=z10+b1.HO502-lid
:AN F 200.0 unlock lid filling
:A -M 0.4 FLASH CLOCK FAST
:O F 200.0 unlock lid filling
:O -M 4.5 GLOBAL LAMBTEST
:= -A 21.1=z10+b1.HO502-mad
:***
I 18.3 = E 18.3=z10+b1.HO502-lid lid closed HO 502
F 0.4 = M 0.4 FLASH CLOCK FAST
F 4.5 = M 4.5 GLOBAL LAMBTEST
Q 21.1 = A 21.1=z10+b1.HO502-mad manual addittion permitted HO 502
Segment 12 Refill HO502 *(7)
:A -MA20.2 FREQ.CONV. REL.
:A -MA20.1 DOSING UNIT ON
:A -E 18.4=z10+b1.HO502-llp *(7) Total network inserted!
:L KT 010.2
:SD -T26 HO502 reserve
:
:C -DB101 SCALE 01 (WORK)
:A D 203.6 Abort Komponent HO500
:A D 140.8 Dosing timeout HO500
:A -T26 HO502 reserve
:CX -DX12 HO502 FEED. HO A1
:S D 7.0 refill HO502
:
:AN -E 18.4=z10+b1.HO502-llp
:R D 7.0 refill HO502
:BE
F 20.2 = MA20.2 FREQ.CONV. REL. *** not used
F 20.1 = MA20.1 DOSING UNIT ON
I 18.4 = E 18.4=z10+b1.HO502-llp low level probe free HO 502
T 26 = T26 HO502 reserve
DB 101 = DB101 SCALE 01 (WORK) working DB plc scale RAM
DX 12 = DX12 HO502 FEED. HO A1 HO502 area 1: feeding hopper
SB 13 -SB13 IO HO503 FEED.H A1 C:ZONE10ST.S5D LEN=208
Page 1
Segment 1 Load inputs
:A -E 4.2=z10+b1.HO503-rfe
:AN -S 4.2=z10+b1.HO503-rfe
:= -ME22.1 DOSING UNIT ON
:
:A -E 6.2=z10+b1.HO500-fco
:AN -S 6.2=z10+b1.HO500-fco
:= -ME22.2 FREQ.CONV. READY
:
:A -E 5.2=z10+b1.HO503-vi:
:AN -S 5.2=z10+b1.HO503-vi:
:= -ME22.3 VIBRATOR ON
:
:A -M 0.1 CONSTANT 1
:= -ME23.1 BLOCK VALVE OPEN simulation
:A -M 0.2 CONSTANT 0
:= -ME23.3 INDICATOR FREE simulation
:A -E 19.0=z10+b1.HO503-ssw *(3) Safety switch
:AN -S 19.0=z10+b1.HO503-ssw *(3)
:= -ME23.2 SAFETY SWITCH OK *(3)
:***
I 4.2 = E 4.2=z10+b1.HO503-rfe rotary feeder on HO 503
S 4.2 = S 4.2=z10+b1.HO503-rfe rotary feeder on HO 503
F 22.1 = ME22.1 DOSING UNIT ON
I 6.2 = E 6.2=z10+b1.HO500-fco frequ.converter ready HO 500
S 6.2 = S 6.2=z10+b1.HO500-fco frequ.converter ready HO 500
F 22.2 = ME22.2 FREQ.CONV. READY
I 5.2 = E 5.2=z10+b1.HO503-vi: vibrator on HO 503
S 5.2 = S 5.2=z10+b1.HO503-vi: vibrator on HO 503
F 22.3 = ME22.3 VIBRATOR ON
F 0.1 = M 0.1 CONSTANT 1
F 23.1 = ME23.1 BLOCK VALVE OPEN
F 0.2 = M 0.2 CONSTANT 0
F 23.3 = ME23.3 INDICATOR FREE
I 19.0 = E 19.0=z10+b1.HO503-ssw safety switch ok HO 503
S 19.0 = S 19.0=z10+b1.HO503-ssw safety switch ok HO 503
F 23.2 = ME23.2 SAFETY SWITCH OK
Segment 2
:DOU -FX13 HO503 FEED. HO A1
Name :HOP-TYP1
SINR : KF +3
OFFS : KF +10
TIM1 : KF +28
TIM2 : KF +29
TIM3 : KF +30
TIM4 : KF +31
:***
FX 13 = FX13 HO503 FEED. HO A1 HO503 area 1: feeding hopper
Segment 3 Write outputs
:A -MA20.1 DOSING UNIT ON
:AN -S 4.2=z10+b1.HO503-rfe
:= -A 4.2=z10+b1.HO503-rfe
:
:A -MA20.3 VIBRATOR ON
:AN -S 5.2=z10+b1.HO503-vi:
:= -A 5.2=z10+b1.HO503-vi:
:***
F 20.1 = MA20.1 DOSING UNIT ON
SB 13 -SB13 IO HO503 FEED.H A1 C:ZONE10ST.S5D LEN=208
Page 2
S 4.2 = S 4.2=z10+b1.HO503-rfe rotary feeder on HO 503
Q 4.2 = A 4.2=z10+b1.HO503-rfe rotary feeder on HO 503
F 20.3 = MA20.3 VIBRATOR ON
S 5.2 = S 5.2=z10+b1.HO503-vi: vibrator on HO 503
Q 5.2 = A 5.2=z10+b1.HO503-vi: vibrator on HO 503
Segment 4 FiFo - Parameter
:CX -DX13 HO503 FEED. HO A1
:
:L KF +240
:T -MW180 PARAMETER 1 FiFo - DB
:
:L KF +0
:T -MW182 PARAMETER 2 FiFo - Output
:
:L KF +66
:T -MW184 PARAMETER 3 FiFo - Request
:
:L KF +3
:T -MW186 DW_ADDRESS Hopper No.
:***
FW 180 = MW180 PARAMETER 1
FW 182 = MW182 PARAMETER 2
FW 184 = MW184 PARAMETER 3
FW 186 = MW186 DW_ADDRESS
DX 13 = DX13 HO503 FEED. HO A1 HO503 area 1: feeding hopper
Segment 5 Addition - FiFo / Request
:L -MW176 ACT.NO. ADD.-FIFO
:L -MW186 DW_ADDRESS Hopper No.
:><F
:A(
:L DW 6 01 filling release
:L KF +1 01
:!=F 01
:) 01
:JC -FB136 ASSIGN DATABIT
Name :DBIT-ZUW
DB : -MW180 PARAMETER 1 FiFo - DB
DW : -MW184 PARAMETER 3 FiFo - Request
BIT : -MW186 DW_ADDRESS Hopper No.
WERT : -M 0.1 CONSTANT 1
DBDX : KS DB
:***
FW 176 = MW176 ACT.NO. ADD.-FIFO
FW 186 = MW186 DW_ADDRESS
FW 180 = MW180 PARAMETER 1
FW 184 = MW184 PARAMETER 3
F 0.1 = M 0.1 CONSTANT 1
FB 136 = FB136 ASSIGN DATABIT
Segment 6 Addition - FiFo / Delete Request
:L -MW176 ACT.NO. ADD.-FIFO
:L -MW186 DW_ADDRESS Hopper No.
:><F
:A(
:L DW 6 01 filling release
:L KF +1 01
:><F 01
:) 01
SB 13 -SB13 IO HO503 FEED.H A1 C:ZONE10ST.S5D LEN=208
Page 3
:JC -FB136 ASSIGN DATABIT
Name :DBIT-ZUW
DB : -MW180 PARAMETER 1 FiFo - DB
DW : -MW184 PARAMETER 3 FiFo - Request
BIT : -MW186 DW_ADDRESS Hopper No.
WERT : -M 0.2 CONSTANT 0
DBDX : KS DB
:***
FW 176 = MW176 ACT.NO. ADD.-FIFO
FW 186 = MW186 DW_ADDRESS
FW 180 = MW180 PARAMETER 1
FW 184 = MW184 PARAMETER 3
F 0.2 = M 0.2 CONSTANT 0
FB 136 = FB136 ASSIGN DATABIT
Segment 7 Addition - FiFo / Release
:L -MW176 ACT.NO. ADD.-FIFO
:L -MW186 DW_ADDRESS Hopper No.
:!=F
:A(
:L DW 6 01 filling release
:L KF +1 01
:><F 01
:) 01
:JC -FB176 STORE DW INDIR.
Name :TANS DW
DB : -MW180 PARAMETER 1 FiFo - DB
DW : -MW182 PARAMETER 2 FiFo - Output
WERT : -MW182 PARAMETER 2 Wert=0 => delete FiFo - Output
DBDX : KS DB
:***
FW 176 = MW176 ACT.NO. ADD.-FIFO
FW 186 = MW186 DW_ADDRESS
FW 180 = MW180 PARAMETER 1
FW 182 = MW182 PARAMETER 2
FB 176 = FB176 STORE DW INDIR. sp
Segment 8 unlock lid filling
:L -MW176 ACT.NO. ADD.-FIFO
:L -MW186 DW_ADDRESS Hopper No.
:!=F
:A(
:L DW 6 01 filling release
:L KF +1 01
:!=F 01
:) 01
:A -E 18.0=z10+b1.HO501-lid
:A -E 18.3=z10+b1.HO502-lid
:AN -A 15.7=z10+b1.HO504-lod
:A -E 19.1=z10+b1.HO504-lid
:= F 200.0 unlock lid filling
:***
FW 176 = MW176 ACT.NO. ADD.-FIFO
FW 186 = MW186 DW_ADDRESS
I 18.0 = E 18.0=z10+b1.HO501-lid lid closed HO 501
I 18.3 = E 18.3=z10+b1.HO502-lid lid closed HO 502
Q 15.7 = A 15.7=z10+b1.HO504-lod locking device release HO 504
I 19.1 = E 19.1=z10+b1.HO504-lid lid closed HO 504
SB 13 -SB13 IO HO503 FEED.H A1 C:ZONE10ST.S5D LEN=208
Page 4
Segment 9 unlock lid
:A F 200.0 unlock lid filling
:A -E 18.6=z10+b1.HO503-lid
:AN -E 13.3=z10+b1.HO501-exf
:A -E 17.3=z10+b1.HO501-exf
:AN -S 13.3=z10+b1.HO501-exf
:AN -S 17.3=z10+b1.HO501-exf
:AN -E 13.4=z10+b1.HO502-exf
:A -E 17.4=z10+b1.HO502-exf
:AN -S 13.4=z10+b1.HO502-exf
:AN -S 17.4=z10+b1.HO502-exf
:AN -E 13.6=z10+b1.HO504-exf
:A -E 17.6=z10+b1.HO504-exf
:AN -S 13.6=z10+b1.HO504-exf
:AN -S 17.6=z10+b1.HO504-exf
:= -A 15.6=z10+b1.HO503-lod
:***
I 18.6 = E 18.6=z10+b1.HO503-lid lid closed HO 503
I 13.3 = E 13.3=z10+b1.HO501-exf exhaustflap open HO 501
I 17.3 = E 17.3=z10+b1.HO501-exf exhaustflap closed HO 501
S 13.3 = S 13.3=z10+b1.HO501-exf exhaustflap open HO 501
S 17.3 = S 17.3=z10+b1.HO501-exf exhaustflap closed HO 501
I 13.4 = E 13.4=z10+b1.HO502-exf exhaustflap open HO 502
I 17.4 = E 17.4=z10+b1.HO502-exf exhaustflap closed HO 502
S 13.4 = S 13.4=z10+b1.HO502-exf exhaustflap open HO 502
S 17.4 = S 17.4=z10+b1.HO502-exf exhaustflap closed HO 502
I 13.6 = E 13.6=z10+b1.HO504-exf exhaustflap open HO 504
I 17.6 = E 17.6=z10+b1.HO504-exf exhaustflap closed HO 504
S 13.6 = S 13.6=z10+b1.HO504-exf exhaustflap open HO 504
S 17.6 = S 17.6=z10+b1.HO504-exf exhaustflap closed HO 504
Q 15.6 = A 15.6=z10+b1.HO503-lod locking device release HO 503
Segment 10 exhaust flap
:A -E 18.0=z10+b1.HO501-lid
:A -E 18.3=z10+b1.HO502-lid
:AN -E 18.6=z10+b1.HO503-lid
:A -E 19.1=z10+b1.HO504-lid
:AN -E 13.3=z10+b1.HO501-exf
:A -E 17.3=z10+b1.HO501-exf
:AN -S 13.3=z10+b1.HO501-exf
:AN -S 17.3=z10+b1.HO501-exf
:AN -E 13.4=z10+b1.HO502-exf
:A -E 17.4=z10+b1.HO502-exf
:AN -S 13.4=z10+b1.HO502-exf
:AN -S 17.4=z10+b1.HO502-exf
:AN -E 13.6=z10+b1.HO504-exf
:A -E 17.6=z10+b1.HO504-exf
:AN -S 13.6=z10+b1.HO504-exf
:AN -S 17.6=z10+b1.HO504-exf
:= -A 13.5=z10+b1.HO503-exf
:***
I 18.0 = E 18.0=z10+b1.HO501-lid lid closed HO 501
I 18.3 = E 18.3=z10+b1.HO502-lid lid closed HO 502
I 18.6 = E 18.6=z10+b1.HO503-lid lid closed HO 503
I 19.1 = E 19.1=z10+b1.HO504-lid lid closed HO 504
I 13.3 = E 13.3=z10+b1.HO501-exf exhaustflap open HO 501
I 17.3 = E 17.3=z10+b1.HO501-exf exhaustflap closed HO 501
S 13.3 = S 13.3=z10+b1.HO501-exf exhaustflap open HO 501
S 17.3 = S 17.3=z10+b1.HO501-exf exhaustflap closed HO 501
I 13.4 = E 13.4=z10+b1.HO502-exf exhaustflap open HO 502
I 17.4 = E 17.4=z10+b1.HO502-exf exhaustflap closed HO 502
S 13.4 = S 13.4=z10+b1.HO502-exf exhaustflap open HO 502
SB 13 -SB13 IO HO503 FEED.H A1 C:ZONE10ST.S5D LEN=208
Page 5
S 17.4 = S 17.4=z10+b1.HO502-exf exhaustflap closed HO 502
I 13.6 = E 13.6=z10+b1.HO504-exf exhaustflap open HO 504
I 17.6 = E 17.6=z10+b1.HO504-exf exhaustflap closed HO 504
S 13.6 = S 13.6=z10+b1.HO504-exf exhaustflap open HO 504
S 17.6 = S 17.6=z10+b1.HO504-exf exhaustflap closed HO 504
Q 13.5 = A 13.5=z10+b1.HO503-exf exhaustflap open HO 503
Segment 11 manual addition permitted
:AN -E 18.6=z10+b1.HO503-lid
:AN F 200.0 unlock lid filling
:A -M 0.4 FLASH CLOCK FAST
:O F 200.0 unlock lid filling
:O -M 4.5 GLOBAL LAMBTEST
:= -A 21.2=z10+b1.HO503-mad
:***
I 18.6 = E 18.6=z10+b1.HO503-lid lid closed HO 503
F 0.4 = M 0.4 FLASH CLOCK FAST
F 4.5 = M 4.5 GLOBAL LAMBTEST
Q 21.2 = A 21.2=z10+b1.HO503-mad manual addittion permitted HO 503
Segment 12 Refill HO503 *(7)
:A -MA20.2 FREQ.CONV. REL.
:A -MA20.1 DOSING UNIT ON
:A -E 18.7=z10+b1.HO503-llp *(7) Total network inserted!
:L KT 010.2
:SD -T30 HO503 reserve
:
:C -DB101 SCALE 01 (WORK)
:A D 203.6 Abort Component HO500
:A D 140.8 Dosing timeout HO500
:A -T30 HO503 reserve
:CX -DX13 HO503 FEED. HO A1
:S D 7.0 Refill HO503
:
:AN -E 18.7=z10+b1.HO503-llp
:R D 7.0 Refill HO503
:BE
F 20.2 = MA20.2 FREQ.CONV. REL. *** not used
F 20.1 = MA20.1 DOSING UNIT ON
I 18.7 = E 18.7=z10+b1.HO503-llp low level probe free HO 503
T 30 = T30 HO503 reserve
DB 101 = DB101 SCALE 01 (WORK) working DB plc scale RAM
DX 13 = DX13 HO503 FEED. HO A1 HO503 area 1: feeding hopper
SB 14 -SB14 IO HO504 FEED.H A1 C:ZONE10ST.S5D LEN=214
Page 1
Segment 1 Load inputs
:A -M 0.1 CONSTANT 1
:= -ME22.1 DOSING UNIT ON simulation
:
:A -E 5.3=z10+b1.HO504-vi:
:AN -S 5.3=z10+b1.HO504-vi:
:= -ME22.3 VIBRATOR ON
:
:A -E 11.2=z10+b1.HO504-fav *(2)
:AN -S 11.2=z10+b1.HO504-fav *(2)
:AN -S 15.2=z10+b1.HO504-fav *(2)
:= -ME22.7 FRESH AIR V.CLOS *(2)
:
:A -E 19.2=z10+b1.HO504-llp
:= -ME23.3 INDICATOR FREE
:
:A -E 19.1=z10+b1.HO504-lid
:= -ME23.4 LID CLOSED
:
:A -E 15.2=z10+b1.HO504-fav *(2)
:AN -S 11.2=z10+b1.HO504-fav *(2)
:AN -S 15.2=z10+b1.HO504-fav *(2)
:= -ME23.7 FRESH AIR V.OPEN *(2)
:***
F 0.1 = M 0.1 CONSTANT 1
F 22.1 = ME22.1 DOSING UNIT ON
I 5.3 = E 5.3=z10+b1.HO504-vi: vibrator on HO 504
S 5.3 = S 5.3=z10+b1.HO504-vi: vibrator on HO 504
F 22.3 = ME22.3 VIBRATOR ON
I 11.2 = E 11.2=z10+b1.HO504-fav fresh air valve closed HO 504
S 11.2 = S 11.2=z10+b1.HO504-fav fresh air valve closed HO 504
S 15.2 = S 15.2=z10+b1.HO504-fav fresh air valve open HO 504
F 22.7 = ME22.7 FRESH AIR V.CLOS
I 19.2 = E 19.2=z10+b1.HO504-llp low level probe free HO 504
F 23.3 = ME23.3 INDICATOR FREE
I 19.1 = E 19.1=z10+b1.HO504-lid lid closed HO 504
F 23.4 = ME23.4 LID CLOSED
I 15.2 = E 15.2=z10+b1.HO504-fav fresh air valve open HO 504
F 23.7 = ME23.7 FRESH AIR V.OPEN
Segment 2
:DOU -FX14 HO504 FEED. HO A1
Name :HOP-TYP2
SINR : KF +4
OFFS : KF +10
TIM1 : KF +32
TIM2 : KF +33
TIM3 : KF +34
TIM4 : KF +35
:
:***
FX 14 = FX14 HO504 FEED. HO A1 HO504 area 1: feeding hopper
Segment 3 Write outputs
:CX -DX14 HO504 FEED. HO A1
:
:A -MA20.3 VIBRATOR ON
:AN -S 5.3=z10+b1.HO504-vi:
:= -A 5.3=z10+b1.HO504-vi:
:
:A -MA20.7 FRESH AIR V.CLOS *(2) new flag
SB 14 -SB14 IO HO504 FEED.H A1 C:ZONE10ST.S5D LEN=214
Page 2
:= -A 11.2=z10+b1.HO504-fav *(2)
:= D 6.0 release lid lock HO504
:***
F 20.3 = MA20.3 VIBRATOR ON
S 5.3 = S 5.3=z10+b1.HO504-vi: vibrator on HO 504
Q 5.3 = A 5.3=z10+b1.HO504-vi: vibrator on HO 504
F 20.7 = MA20.7 FRESH AIR V.CLOS
Q 11.2 = A 11.2=z10+b1.HO504-fav fresh air valve closed HO 504
DX 14 = DX14 HO504 FEED. HO A1 HO504 area 1: feeding hopper
Segment 4 FiFo - Parameter
:L KF +240
:T -MW180 PARAMETER 1 FiFo - DB
:
:L KF +0
:T -MW182 PARAMETER 2 FiFo - Output
:
:L KF +66
:T -MW184 PARAMETER 3 FiFo - Request
:
:L KF +4
:T -MW186 DW_ADDRESS Hopper No.
:***
FW 180 = MW180 PARAMETER 1
FW 182 = MW182 PARAMETER 2
FW 184 = MW184 PARAMETER 3
FW 186 = MW186 DW_ADDRESS
Segment 5 Addition - FiFo / Request
:L -MW176 ACT.NO. ADD.-FIFO
:L -MW186 DW_ADDRESS Hopper No.
:><F
:A(
:L DW 6 01 filling release
:L KF +1 01
:!=F 01
:) 01
:JC -FB136 ASSIGN DATABIT
Name :DBIT-ZUW
DB : -MW180 PARAMETER 1 FiFo - DB
DW : -MW184 PARAMETER 3 FiFo - Request
BIT : -MW186 DW_ADDRESS Hopper No.
WERT : -M 0.1 CONSTANT 1
DBDX : KS DB
:***
FW 176 = MW176 ACT.NO. ADD.-FIFO
FW 186 = MW186 DW_ADDRESS
FW 180 = MW180 PARAMETER 1
FW 184 = MW184 PARAMETER 3
F 0.1 = M 0.1 CONSTANT 1
FB 136 = FB136 ASSIGN DATABIT
Segment 6 Addition - FiFo / Delete Request
:L -MW176 ACT.NO. ADD.-FIFO
:L -MW186 DW_ADDRESS Hopper No.
:><F
:A(
:L DW 6 01 filling release
:L KF +1 01
SB 14 -SB14 IO HO504 FEED.H A1 C:ZONE10ST.S5D LEN=214
Page 3
:><F 01
:) 01
:JC -FB136 ASSIGN DATABIT
Name :DBIT-ZUW
DB : -MW180 PARAMETER 1 FiFo - DB
DW : -MW184 PARAMETER 3 FiFo - Request
BIT : -MW186 DW_ADDRESS Hopper No.
WERT : -M 0.2 CONSTANT 0
DBDX : KS DB
:***
FW 176 = MW176 ACT.NO. ADD.-FIFO
FW 186 = MW186 DW_ADDRESS
FW 180 = MW180 PARAMETER 1
FW 184 = MW184 PARAMETER 3
F 0.2 = M 0.2 CONSTANT 0
FB 136 = FB136 ASSIGN DATABIT
Segment 7 Addition - FiFo / Release
:L -MW176 ACT.NO. ADD.-FIFO
:L -MW186 DW_ADDRESS Hopper No.
:!=F
:A(
:L DW 6 01 filling release
:L KF +1 01
:><F 01
:) 01
:JC -FB176 STORE DW INDIR.
Name :TANS DW
DB : -MW180 PARAMETER 1 FiFo - DB
DW : -MW182 PARAMETER 2 FiFo - Output
WERT : -MW182 PARAMETER 2 Wert=0 => delete FiFo - Output
DBDX : KS DB
:***
FW 176 = MW176 ACT.NO. ADD.-FIFO
FW 186 = MW186 DW_ADDRESS
FW 180 = MW180 PARAMETER 1
FW 182 = MW182 PARAMETER 2
FB 176 = FB176 STORE DW INDIR. sp
Segment 8 unlock lid filling
:L -MW176 ACT.NO. ADD.-FIFO
:L -MW186 DW_ADDRESS Hopper No.
:!=F
:A(
:L DW 6 01 filing release
:L KF +1 01
:!=F 01
:) 01
:A -E 18.0=z10+b1.HO501-lid
:A -E 18.3=z10+b1.HO502-lid
:A -E 18.6=z10+b1.HO503-lid
:= F 200.0 unlock lid filling
:***
FW 176 = MW176 ACT.NO. ADD.-FIFO
FW 186 = MW186 DW_ADDRESS
I 18.0 = E 18.0=z10+b1.HO501-lid lid closed HO 501
I 18.3 = E 18.3=z10+b1.HO502-lid lid closed HO 502
I 18.6 = E 18.6=z10+b1.HO503-lid lid closed HO 503
SB 14 -SB14 IO HO504 FEED.H A1 C:ZONE10ST.S5D LEN=214
Page 4
Segment 9 unlock lid request
:CX -DX200 PL1-5 MX520,HO580
:O(
:L DW 53 01 PL ING_ADD: Step_Index
:L KF +75 01
:!=F 01 Step 75: man_add confirm ?
:A -M 18.3 SILO_OCCUPIED_OK 01
:) 01
:O F 200.0 unlock lid filling
:O -M 19.7 FAULT DOSING TIM dosing time out
:AN -A 15.4=z10+b1.HO501-lod
:A -E 18.0=z10+b1.HO501-lid
:AN -A 15.5=z10+b1.HO502-lod
:A -E 18.3=z10+b1.HO502-lid
:AN -A 15.6=z10+b1.HO503-lod
:A -E 18.6=z10+b1.HO503-lid
:= F 200.1 unlock lid request
:***
F 18.3 = M 18.3 SILO_OCCUPIED_OK
F 19.7 = M 19.7 FAULT DOSING TIM
Q 15.4 = A 15.4=z10+b1.HO501-lod locking device release HO 501
I 18.0 = E 18.0=z10+b1.HO501-lid lid closed HO 501
Q 15.5 = A 15.5=z10+b1.HO502-lod locking device release HO 502
I 18.3 = E 18.3=z10+b1.HO502-lid lid closed HO 502
Q 15.6 = A 15.6=z10+b1.HO503-lod locking device release HO 503
I 18.6 = E 18.6=z10+b1.HO503-lid lid closed HO 503
DX 200 = DX200 PL1-5 MX520,HO580 PL1-3: UNIT MX520 PL4,5: UNIT HO580
Segment 10 unlock lid
:A F 200.1 unlock lid request
:A -E 19.1=z10+b1.HO504-lid
:AN -E 13.3=z10+b1.HO501-exf
:A -E 17.3=z10+b1.HO501-exf
:AN -S 13.3=z10+b1.HO501-exf
:AN -S 17.3=z10+b1.HO501-exf
:AN -E 13.4=z10+b1.HO502-exf
:A -E 17.4=z10+b1.HO502-exf
:AN -S 13.4=z10+b1.HO502-exf
:AN -S 17.4=z10+b1.HO502-exf
:AN -E 13.5=z10+b1.HO503-exf
:A -E 17.5=z10+b1.HO503-exf
:AN -S 13.5=z10+b1.HO503-exf
:AN -S 17.5=z10+b1.HO503-exf
:= -A 15.7=z10+b1.HO504-lod
:***
I 19.1 = E 19.1=z10+b1.HO504-lid lid closed HO 504
I 13.3 = E 13.3=z10+b1.HO501-exf exhaustflap open HO 501
I 17.3 = E 17.3=z10+b1.HO501-exf exhaustflap closed HO 501
S 13.3 = S 13.3=z10+b1.HO501-exf exhaustflap open HO 501
S 17.3 = S 17.3=z10+b1.HO501-exf exhaustflap closed HO 501
I 13.4 = E 13.4=z10+b1.HO502-exf exhaustflap open HO 502
I 17.4 = E 17.4=z10+b1.HO502-exf exhaustflap closed HO 502
S 13.4 = S 13.4=z10+b1.HO502-exf exhaustflap open HO 502
S 17.4 = S 17.4=z10+b1.HO502-exf exhaustflap closed HO 502
I 13.5 = E 13.5=z10+b1.HO503-exf exhaustflap open HO 503
I 17.5 = E 17.5=z10+b1.HO503-exf exhaustflap closed HO 503
S 13.5 = S 13.5=z10+b1.HO503-exf exhaustflap open HO 503
S 17.5 = S 17.5=z10+b1.HO503-exf exhaustflap closed HO 503
Q 15.7 = A 15.7=z10+b1.HO504-lod locking device release HO 504
Segment 11 exhaust flap
SB 14 -SB14 IO HO504 FEED.H A1 C:ZONE10ST.S5D LEN=214
Page 5
:A -E 18.0=z10+b1.HO501-lid
:A -E 18.3=z10+b1.HO502-lid
:A -E 18.6=z10+b1.HO503-lid
:AN -E 19.1=z10+b1.HO504-lid
:AN -E 13.3=z10+b1.HO501-exf
:A -E 17.3=z10+b1.HO501-exf
:AN -S 13.3=z10+b1.HO501-exf
:AN -S 17.3=z10+b1.HO501-exf
:AN -E 13.4=z10+b1.HO502-exf
:A -E 17.4=z10+b1.HO502-exf
:AN -S 13.4=z10+b1.HO502-exf
:AN -S 17.4=z10+b1.HO502-exf
:AN -E 13.5=z10+b1.HO503-exf
:A -E 17.5=z10+b1.HO503-exf
:AN -S 13.5=z10+b1.HO503-exf
:AN -S 17.5=z10+b1.HO503-exf
:= -A 13.6=z10+b1.HO504-exf
:***
I 18.0 = E 18.0=z10+b1.HO501-lid lid closed HO 501
I 18.3 = E 18.3=z10+b1.HO502-lid lid closed HO 502
I 18.6 = E 18.6=z10+b1.HO503-lid lid closed HO 503
I 19.1 = E 19.1=z10+b1.HO504-lid lid closed HO 504
I 13.3 = E 13.3=z10+b1.HO501-exf exhaustflap open HO 501
I 17.3 = E 17.3=z10+b1.HO501-exf exhaustflap closed HO 501
S 13.3 = S 13.3=z10+b1.HO501-exf exhaustflap open HO 501
S 17.3 = S 17.3=z10+b1.HO501-exf exhaustflap closed HO 501
I 13.4 = E 13.4=z10+b1.HO502-exf exhaustflap open HO 502
I 17.4 = E 17.4=z10+b1.HO502-exf exhaustflap closed HO 502
S 13.4 = S 13.4=z10+b1.HO502-exf exhaustflap open HO 502
S 17.4 = S 17.4=z10+b1.HO502-exf exhaustflap closed HO 502
I 13.5 = E 13.5=z10+b1.HO503-exf exhaustflap open HO 503
I 17.5 = E 17.5=z10+b1.HO503-exf exhaustflap closed HO 503
S 13.5 = S 13.5=z10+b1.HO503-exf exhaustflap open HO 503
S 17.5 = S 17.5=z10+b1.HO503-exf exhaustflap closed HO 503
Q 13.6 = A 13.6=z10+b1.HO504-exf exhaustflap open HO 504
Segment 12 man.addition permitted/ complete
:O -A 15.7=z10+b1.HO504-lod
:ON -E 19.1=z10+b1.HO504-lid
:AN F 200.0 unlock lid filling
:A -M 0.4 FLASH CLOCK FAST
:O F 200.0 unlock lid filling
:O -M 4.5 GLOBAL LAMBTEST
:= -A 21.3=z10+b1.HO504-mad
:
:O -M 18.3 SILO_OCCUPIED_OK
:O -M 4.5 GLOBAL LAMBTEST
:= -A 21.6=z10+b1.HO504-mad
:BE
Q 15.7 = A 15.7=z10+b1.HO504-lod locking device release HO 504
I 19.1 = E 19.1=z10+b1.HO504-lid lid closed HO 504
F 0.4 = M 0.4 FLASH CLOCK FAST
F 4.5 = M 4.5 GLOBAL LAMBTEST
Q 21.3 = A 21.3=z10+b1.HO504-mad manual addittion permitted HO 504
F 18.3 = M 18.3 SILO_OCCUPIED_OK
Q 21.6 = A 21.6=z10+b1.HO504-mad manual addittion complete HO 504
SB 15 -SB15 IO HO505 FEED.H A1 C:ZONE10ST.S5D LEN=103
Page 1
Segment 1 Load inputs
:A -E 4.4=z10+b1.HO505-dsc
:AN -S 4.4=z10+b1.HO505-dsc
:= -ME22.1 DOSING UNIT ON
:
:A -E 6.2=z10+b1.HO500-fco
:AN -S 6.2=z10+b1.HO500-fco
:= -ME22.2 FREQ.CONV. READY
:
:A -E 5.4=z10+b1.HO505-vi:
:AN -S 5.4=z10+b1.HO505-vi:
:= -ME22.3 VIBRATOR ON
:
:A -E 6.7=z10+b1.fra505-vi
:AN -S 6.7=z10+b1.fra505-vi
:= -ME22.4 VIBRATOR BIG-BAG
:
:A -E 11.3=z10+b1.HO505-csc
:AN -S 11.3=z10+b1.HO505-csc
:= -ME23.1 BLOCK VALVE OPEN
:***
I 4.4 = E 4.4=z10+b1.HO505-dsc dosing screw on HO 505
S 4.4 = S 4.4=z10+b1.HO505-dsc dosing screw on HO 505
F 22.1 = ME22.1 DOSING UNIT ON
I 6.2 = E 6.2=z10+b1.HO500-fco frequ.converter ready HO 500
S 6.2 = S 6.2=z10+b1.HO500-fco frequ.converter ready HO 500
F 22.2 = ME22.2 FREQ.CONV. READY
I 5.4 = E 5.4=z10+b1.HO505-vi: vibrator on HO 505
S 5.4 = S 5.4=z10+b1.HO505-vi: vibrator on HO 505
F 22.3 = ME22.3 VIBRATOR ON
I 6.7 = E 6.7=z10+b1.fra505-vi vibrator on frame 505
S 6.7 = S 6.7=z10+b1.fra505-vi vibrator on frame 505
F 22.4 = ME22.4 VIBRATOR BIG-BAG
I 11.3 = E 11.3=z10+b1.HO505-csc cone screw open HO 505
S 11.3 = S 11.3=z10+b1.HO505-csc cone screw open HO 505
F 23.1 = ME23.1 BLOCK VALVE OPEN
Segment 2 Load inputs
:A -E 19.5=z10+b1.HO505-llp
:= -ME23.3 INDICATOR FREE
:***
I 19.5 = E 19.5=z10+b1.HO505-llp low level probe free HO 505
F 23.3 = ME23.3 INDICATOR FREE
Segment 3
:DOU -FX15 HO505 FEED. HO A1
Name :HOP-TYP3
SINR : KF +5
OFFS : KF +10
TIM1 : KF +36
TIM2 : KF +37
TIM3 : KF +38
TIM4 : KF +39
:***
FX 15 = FX15 HO505 FEED. HO A1 HO505 area 1: big-bag feeding hopper
Segment 4 Write outputs
:A -MA20.1 DOSING UNIT ON
:AN -S 4.4=z10+b1.HO505-dsc
:= -A 4.4=z10+b1.HO505-dsc
SB 15 -SB15 IO HO505 FEED.H A1 C:ZONE10ST.S5D LEN=103
Page 2
:
:A -MA20.3 VIBRATOR ON
:AN -S 5.4=z10+b1.HO505-vi:
:= -A 5.4=z10+b1.HO505-vi:
:
:A -MA20.4 VIBRATOR BIG-BAG
:AN -S 6.7=z10+b1.fra505-vi
:= -A 6.7=z10+b1.fra505-vi
:
:A -MA21.1 BLOCK VALVE OPEN
:= -A 11.3=z10+b1.HO505-csc
:***
F 20.1 = MA20.1 DOSING UNIT ON
S 4.4 = S 4.4=z10+b1.HO505-dsc dosing screw on HO 505
Q 4.4 = A 4.4=z10+b1.HO505-dsc dosing screw on HO 505
F 20.3 = MA20.3 VIBRATOR ON
S 5.4 = S 5.4=z10+b1.HO505-vi: vibrator on HO 505
Q 5.4 = A 5.4=z10+b1.HO505-vi: vibrator on HO 505
F 20.4 = MA20.4 VIBRATOR BIG-BAG
S 6.7 = S 6.7=z10+b1.fra505-vi vibrator on frame 505
Q 6.7 = A 6.7=z10+b1.fra505-vi vibrator on frame 505
F 21.1 = MA21.1 BLOCK VALVE OPEN
Q 11.3 = A 11.3=z10+b1.HO505-csc cone screw open HO 505
Segment 5
:CX -DX15 HO505 FEED. HO A1
:***
DX 15 = DX15 HO505 FEED. HO A1 HO505 area 1: big-bag feeding hopper
Segment 6 unlock lid, man.add.permitted
:L DW 6 filling release
:L KF +1
:!=F
:= F 200.0
:
:O F 200.0
:A -E 19.4=z10+b1.HO505-inl
:= -A 15.3=z10+b1.HO505-lod *(1) change a16.0 in A15.3
:
:AN -E 19.4=z10+b1.HO505-inl
:AN F 200.0
:A -M 0.4 FLASH CLOCK FAST
:O F 200.0
:O -M 4.5 GLOBAL LAMBTEST
:= -A 21.4=z10+b1.HO505-mad
:***
I 19.4 = E 19.4=z10+b1.HO505-inl inlet closed HO 505
Q 15.3 = A 15.3=z10+b1.HO505-lod locking device release HO 505
F 0.4 = M 0.4 FLASH CLOCK FAST
F 4.5 = M 4.5 GLOBAL LAMBTEST
Q 21.4 = A 21.4=z10+b1.HO505-mad manual addittion permitted HO 505
Segment 7 Refill HO505 *(7)
:A -MA20.2 FREQ.CONV. REL.
:A -MA20.1 DOSING UNIT ON
:A -E 19.5=z10+b1.HO505-llp *(7) Totasl network inserted!
:L KT 010.2
:SD -T39 HO505 reserve
:
:C -DB101 SCALE 01 (WORK)
:A D 203.6 Abort Component
SB 15 -SB15 IO HO505 FEED.H A1 C:ZONE10ST.S5D LEN=103
Page 3
:A D 140.8 Dosing timeout
:A -T39 HO505 reserve
:CX -DX15 HO505 FEED. HO A1
:S D 7.0 Refill HO505
:
:AN -E 19.5=z10+b1.HO505-llp
:R D 7.0 Refill HO505
:BE
F 20.2 = MA20.2 FREQ.CONV. REL. *** not used
F 20.1 = MA20.1 DOSING UNIT ON
I 19.5 = E 19.5=z10+b1.HO505-llp low level probe free HO 505
T 39 = T39 HO505 reserve
DB 101 = DB101 SCALE 01 (WORK) working DB plc scale RAM
DX 15 = DX15 HO505 FEED. HO A1 HO505 area 1: big-bag feeding hopper
SB 30 -SB30 IO DR540 DRY. A2&3 C:ZONE10ST.S5D LEN=46
Page 1
Segment 1 Load inputs
:A -E 7.0=z10+b3.DR540-rfe
:AN -S 7.0=z10+b3.DR540-rfe
:= -ME22.1 DOSING UNIT ON
:
:A -E 7.1=z10+b3.DR540-fco
:AN -S 7.1=z10+b3.DR540-fco
:= -ME22.2 FREQ.CONV. READY
:
:A -E 20.6=z10+b3.DR540-ssw
:AN -S 20.6=z10+b3.DR540-ssw
:= -ME23.2 SAFETY SWITCH OK
:
:A -E 20.5=z10+b3.DR540-llp
:= -ME23.3 INDICATOR FREE
:
:A -E 24.4=z10+DKC.DR540-di
:= -ME23.6 DRYER_DISCH ON *(2) new flag
:***
I 7.0 = E 7.0=z10+b3.DR540-rfe rotary feeder on DR 540
S 7.0 = S 7.0=z10+b3.DR540-rfe rotary feeder on DR 540
F 22.1 = ME22.1 DOSING UNIT ON
I 7.1 = E 7.1=z10+b3.DR540-fco frequ.converter ready DR 540
S 7.1 = S 7.1=z10+b3.DR540-fco frequ.converter ready DR 540
F 22.2 = ME22.2 FREQ.CONV. READY
I 20.6 = E 20.6=z10+b3.DR540-ssw safety switch ok DR 540
S 20.6 = S 20.6=z10+b3.DR540-ssw safety switch ok DR 540
F 23.2 = ME23.2 SAFETY SWITCH OK
I 20.5 = E 20.5=z10+b3.DR540-llp low level probe free DR 540
F 23.3 = ME23.3 INDICATOR FREE
I 24.4 = E 24.4=z10+DKC.DR540-di discharge 5 on DR 540
F 23.6 = ME23.6 DRYER_DISCH ON
Segment 2
:DOU -FX30 DR540 DRYER A 2&3
Name :DRYER SI
SINR : KF +0
OFFS : KF +30
TIM1 : KF +50
TIM2 : KF +51
TIM3 : KF +52
TIM4 : KF +53
PWFU : KF +130
:***
FX 30 = FX30 DR540 DRYER A 2&3 DR540 area 2 & 3: line dryer
Segment 3 Write outputs
:A -MA20.1 DOSING UNIT ON
:AN -S 7.0=z10+b3.DR540-rfe
:= -A 7.0=z10+b3.DR540-rfe
:
:A -MA20.2 FREQ.CONV. REL.
:= -A 7.1=z10+b3.DR540-fco
:= -A 24.5=z10+AZO.HO561-ch
:BE
F 20.1 = MA20.1 DOSING UNIT ON
S 7.0 = S 7.0=z10+b3.DR540-rfe rotary feeder on DR 540
Q 7.0 = A 7.0=z10+b3.DR540-rfe rotary feeder on DR 540
F 20.2 = MA20.2 FREQ.CONV. REL. *** not used
Q 7.1 = A 7.1=z10+b3.DR540-fco frequ.converter release DR 540
SB 30 -SB30 IO DR540 DRY. A2&3 C:ZONE10ST.S5D LEN=46
Page 2
Q 24.5 = A 24.5=z10+AZO.HO561-ch charge 5 ready HO 561
SB 32 C:ZONE10ST.S5D LEN=20
Page 1
Segment 1 Load inputs
:A -M 0.1 CONSTANT 1
:= -ME22.5 DOSING FEEDER ON simulation
:***
F 0.1 = M 0.1 CONSTANT 1
F 22.5 = ME22.5 DOSING FEEDER ON
Segment 2
:DOU FX 32
Name :HOP-TYP4
SINR : KF +2
OFFS : KF +0
TIM1 : KF +0
TIM2 : KF +0
TIM3 : KF +0
TIM4 : KF +0
:***
Segment 3 Write outputs
: no outputs
:BE
SB 200 -SB200 CALL PLI RSBatch C:ZONE10ST.S5D LEN=452
Page 1
Segment 1 Watch - Dog fuer Open Batch
:DOU -FX200 PLI_WATCHDOG RSB
Name :WATCHDOG
DBNR : KF +200
OFF : KF +255
TIMR : -T6 PLI-WATCHDOG
TIME : KT 020.2
ALAR : -M 4.6 PLI_WATCHDOG-ALAR
DBDX : -M 0.1 CONSTANT 1
:***
T 6 = T6 PLI-WATCHDOG standard
F 4.6 = M 4.6 PLI_WATCHDOG-ALAR
F 0.1 = M 0.1 CONSTANT 1
FX 200 = FX200 PLI_WATCHDOG RSB
Segment 2 PLI MX520_EMPTY (scale HO500)
:DOU -FX201 PLI_INTERFACE RSB
Name :PLI
DBNR : KF +200 ( PLI Interface )
OFF : KF +0
ALAR : -M 4.6 PLI_WATCHDOG-ALAR
ENAB : -M 0.1 CONSTANT 1
OWNR : -M 4.1 GLOB. MANUAL-MODE
PARA : -M 0.2 CONSTANT 0
REPO : -M 0.1 CONSTANT 1
DBDX : -M 0.1 CONSTANT 1
ENOW : -M 4.7 PLI_ENABLE_EXT_OW
TDUR : -T150 MX520_EMPTY DEL.RE
: --------------------------------
:DOU -FX100 PHASE-L EMPTY
Name :PL-SS-EM
PLDX : KF +200
OFFS : KF +0
WZNR : KF +1
EMPY : -M 42.2 HO500 EMPTY-RANG
UNID : -M 162.0 MX520 UNIT_IDLE
TDDP : -T170 MX520_EMPTY DEL.PA
:***
F 4.6 = M 4.6 PLI_WATCHDOG-ALAR
F 0.1 = M 0.1 CONSTANT 1
F 4.1 = M 4.1 GLOB. MANUAL-MODE
F 0.2 = M 0.2 CONSTANT 0
F 4.7 = M 4.7 PLI_ENABLE_EXT_OW ext ownership for phase possible
T 150 = T150 MX520_EMPTY DEL.RE MX520_EMPTY delay upload reports
F 42.2 = M 42.2 HO500 EMPTY-RANG
F 162.0 = M 162.0 MX520 UNIT_IDLE
T 170 = T170 MX520_EMPTY DEL.PA MX520_EMPTY delay download parameters
FX 201 = FX201 PLI_INTERFACE RSB
FX 100 = FX100 PHASE-L EMPTY
Segment 3 PLI MX520_ING_ADD (scale HO500)
:DOU -FX201 PLI_INTERFACE RSB
Name :PLI
DBNR : KF +200
OFF : KF +50
ALAR : -M 4.6 PLI_WATCHDOG-ALAR
ENAB : -M 0.1 CONSTANT 1
OWNR : -M 4.1 GLOB. MANUAL-MODE
PARA : -M 0.2 CONSTANT 0
REPO : -M 164.0 MX520 I_ADD REP
SB 200 -SB200 CALL PLI RSBatch C:ZONE10ST.S5D LEN=452
Page 2
DBDX : -M 0.1 CONSTANT 1
ENOW : -M 4.7 PLI_ENABLE_EXT_OW
TDUR : -T151 MX520_IN_AD DEL.RE
:
:DOU -FX101 PHASE-L ING_ADD
Name :PL-SS-IA
PLDX : KF +200
OFFS : KF +50
WADB : KF +11
EOSI : -M 42.0 HO500 EOF CHA SI
UNID : -M 162.0 MX520 UNIT_IDLE
REPO : -M 165.7 MX520 I_ADD ROK if last ingredient=0 then REPO=1
TDDP : -T171 MX520_IN_AD DEL.PA
:
:DOU -FX202 PLI->SCALE CHARGE
Name :PLI-SC C
PLDX : KF +200
OFFS : KF +50 --------------------------------
WZNR : KF +1
DBPC : KF +210 ( PLI Interface transfer
DBST : KF +208 to standars PC Interface
WADB : KF +11 and then to PLC-Scale-module)
REPO : -M 165.7 MX520 I_ADD ROK if last ingredient=0 then PREP=1
PREP : -M 164.0 MX520 I_ADD REP
:***
F 4.6 = M 4.6 PLI_WATCHDOG-ALAR
F 0.1 = M 0.1 CONSTANT 1
F 4.1 = M 4.1 GLOB. MANUAL-MODE
F 0.2 = M 0.2 CONSTANT 0
F 164.0 = M 164.0 MX520 I_ADD REP
F 4.7 = M 4.7 PLI_ENABLE_EXT_OW ext ownership for phase possible
T 151 = T151 MX520_IN_AD DEL.RE MX520_ING_ADD delay upload reports
F 42.0 = M 42.0 HO500 EOF CHA SI
F 162.0 = M 162.0 MX520 UNIT_IDLE
F 165.7 = M 165.7 MX520 I_ADD ROK enable reports
T 171 = T171 MX520_IN_AD DEL.PA MX520_ING_ADD delay download parameters
FX 201 = FX201 PLI_INTERFACE RSB
FX 101 = FX101 PHASE-L ING_ADD
FX 202 = FX202 PLI->SCALE CHARGE
Segment 4 PLI MX520_DISCH_NOP (scaleHO500)
:DOU -FX201 PLI_INTERFACE RSB
Name :PLI
DBNR : KF +200
OFF : KF +100 ( PLI Interface )
ALAR : -M 4.6 PLI_WATCHDOG-ALAR
ENAB : -M 0.1 CONSTANT 1
OWNR : -M 4.1 GLOB. MANUAL-MODE
PARA : -M 0.2 CONSTANT 0
REPO : -M 164.1 MX520 DI_NO REP
DBDX : -M 0.1 CONSTANT 1
ENOW : -M 4.7 PLI_ENABLE_EXT_OW
TDUR : -T152 MX520_DI_NO DEL.RE
:
:DOU -FX102 PHASE-L DISCH_NOP
Name :PL-SS-DN
PLDX : KF +200
OFFS : KF +100
ADB : KF +11
EOSI : -M 42.1 HO500 EOF DIS SI
REPO : -M 0.1 CONSTANT 1
UNID : -M 162.0 MX520 UNIT_IDLE
SB 200 -SB200 CALL PLI RSBatch C:ZONE10ST.S5D LEN=452
Page 3
CEMP : -M 0.2 CONSTANT 0 not used
PCOM : -M 0.2 CONSTANT 0 not used
TDDP : -T172 MX520_DI_NO DEL.PA
:
:DOU -FX203 PLI->SCALE DISCHA --------------------------------
Name :PLI-SC D
PLDX : KF +200 ( PLI Interface transfer
OFFS : KF +100 to standard PC Interface
WZNR : KF +1 and then to PLC-Scale-module )
DBPC : KF +210
DBST : KF +208
WADB : KF +11 ??? notwendig ???
PREP : -M 164.1 MX520 DI_NO REP
ENRE : -M 165.6 MX520 DI_NO ROK
:***
F 4.6 = M 4.6 PLI_WATCHDOG-ALAR
F 0.1 = M 0.1 CONSTANT 1
F 4.1 = M 4.1 GLOB. MANUAL-MODE
F 0.2 = M 0.2 CONSTANT 0
F 164.1 = M 164.1 MX520 DI_NO REP
F 4.7 = M 4.7 PLI_ENABLE_EXT_OW ext ownership for phase possible
T 152 = T152 MX520_DI_NO DEL.RE MX520_DISCHARGE_NOP delay upload reports
F 42.1 = M 42.1 HO500 EOF DIS SI
F 162.0 = M 162.0 MX520 UNIT_IDLE
T 172 = T172 MX520_DI_NO DEL.PA MX520_DISCHARGE_NOP delay download param
F 165.6 = M 165.6 MX520 DI_NO ROK enable reports
FX 201 = FX201 PLI_INTERFACE RSB
FX 102 = FX102 PHASE-L DISCH_NOP
FX 203 = FX203 PLI->SCALE DISCHA
Segment 5 PLI HO561_EMPTY (scale HO561)
:DOU -FX201 PLI_INTERFACE RSB
Name :PLI
DBNR : KF +201 ( PLI Interface )
OFF : KF +50
ALAR : -M 4.6 PLI_WATCHDOG-ALAR
ENAB : -M 0.1 CONSTANT 1
OWNR : -M 4.1 GLOB. MANUAL-MODE
PARA : -M 0.2 CONSTANT 0
REPO : -M 0.1 CONSTANT 1
DBDX : -M 0.1 CONSTANT 1
ENOW : -M 4.7 PLI_ENABLE_EXT_OW
TDUR : -T153 HO561_EMPTY DEL.RE
: --------------------------------
:DOU -FX100 PHASE-L EMPTY
Name :PL-SS-EM
PLDX : KF +201
OFFS : KF +50
WZNR : KF +3
EMPY : -M 43.0 HO561 EMPTY-RANG
UNID : -M 162.2 HO561 UNIT_IDLE
TDDP : -T173 HO561_EMPTY DEL.PA
:***
F 4.6 = M 4.6 PLI_WATCHDOG-ALAR
F 0.1 = M 0.1 CONSTANT 1
F 4.1 = M 4.1 GLOB. MANUAL-MODE
F 0.2 = M 0.2 CONSTANT 0
F 4.7 = M 4.7 PLI_ENABLE_EXT_OW ext ownership for phase possible
T 153 = T153 HO561_EMPTY DEL.RE HO561_EMPTY delay upload reports
F 43.0 = M 43.0 HO561 EMPTY-RANG
F 162.2 = M 162.2 HO561 UNIT_IDLE
SB 200 -SB200 CALL PLI RSBatch C:ZONE10ST.S5D LEN=452
Page 4
T 173 = T173 HO561_EMPTY DEL.PA HO561_EMPTY delay download parameters
FX 201 = FX201 PLI_INTERFACE RSB
FX 100 = FX100 PHASE-L EMPTY
Segment 6 PLI HO561_CHARGE (scale HO561)
:DOU -FX201 PLI_INTERFACE RSB
Name :PLI
DBNR : KF +201
OFF : KF +100
ALAR : -M 4.6 PLI_WATCHDOG-ALAR
ENAB : -M 0.1 CONSTANT 1
OWNR : -M 4.1 GLOB. MANUAL-MODE
PARA : -M 0.2 CONSTANT 0
REPO : -M 164.4 HO561 CHARG REP
DBDX : -M 0.1 CONSTANT 1
ENOW : -M 4.7 PLI_ENABLE_EXT_OW
TDUR : -T154 HO561_CHARG DEL.RE
:
:DOU -FX103 PHASE-L CHARGE
Name :PL-SS-CH
PLDX : KF +201
OFFS : KF +100
ADB : KF +31
EOSI : -M 42.6 HO561 EOF CHA SI
SC? : -M 0.1 CONSTANT 1
UNID : -M 162.2 HO561 UNIT_IDLE
PCOM : -M 0.2 CONSTANT 0 not used !
TDDP : -T174 HO561_CHARG DEL.PA
: --------------------------------
:DOU -FX202 PLI->SCALE CHARGE
Name :PLI-SC C
PLDX : KF +201 ( PLI Interface transfer
OFFS : KF +100 to standard PC Interface
WZNR : KF +3 and then to PLC-Scale-module)
DBPC : KF +210
DBST : KF +208
WADB : KF +31 ??? notwendig ???
REPO : -M 0.1 CONSTANT 1
PREP : -M 164.4 HO561 CHARG REP
:***
F 4.6 = M 4.6 PLI_WATCHDOG-ALAR
F 0.1 = M 0.1 CONSTANT 1
F 4.1 = M 4.1 GLOB. MANUAL-MODE
F 0.2 = M 0.2 CONSTANT 0
F 164.4 = M 164.4 HO561 CHARG REP
F 4.7 = M 4.7 PLI_ENABLE_EXT_OW ext ownership for phase possible
T 154 = T154 HO561_CHARG DEL.RE HO561_CHARGE delay upload reports
F 42.6 = M 42.6 HO561 EOF CHA SI
F 162.2 = M 162.2 HO561 UNIT_IDLE
T 174 = T174 HO561_CHARG DEL.PA HO561_CHARGE delay download parameters
FX 201 = FX201 PLI_INTERFACE RSB
FX 103 = FX103 PHASE-L CHARGE
FX 202 = FX202 PLI->SCALE CHARGE
Segment 7 PLI HO561_DISCHARGE (scaleHO561)
:DOU -FX201 PLI_INTERFACE RSB
Name :PLI
DBNR : KF +201
OFF : KF +150 ( PLI Interface )
ALAR : -M 4.6 PLI_WATCHDOG-ALAR
ENAB : -M 0.1 CONSTANT 1
SB 200 -SB200 CALL PLI RSBatch C:ZONE10ST.S5D LEN=452
Page 5
OWNR : -M 4.1 GLOB. MANUAL-MODE
PARA : -M 0.2 CONSTANT 0
REPO : -M 164.5 HO561 DISCH REP
DBDX : -M 0.1 CONSTANT 1
ENOW : -M 4.7 PLI_ENABLE_EXT_OW
TDUR : -T155 HO561_DISCH DEL.RE
:
:O -M 42.7 HO561 EOF DIS SI *(6)
:O -M 59.6 ABORT HO561_DISC *(6)
:= F 210.0 *(6) end of SI HO561_DISCHARGE
:
:DOU -FX104 PHASE-L DISCHARGE
Name :PL-SS-DI
PLDX : KF +201
OFFS : KF +150
ADB : KF +31
EOSI : F 210.0 *(6) end of SI HO561_DISCHARGE
REPO : -M 0.1 CONSTANT 1
UNID : -M 162.2 HO561 UNIT_IDLE
CEMP : -M 0.2 CONSTANT 0 not used
PCOM : -M 0.2 CONSTANT 0 not used
TDDP : -T175 HO561_DISCH DEL.PA
:
:DOU -FX203 PLI->SCALE DISCHA --------------------------------
Name :PLI-SC D
PLDX : KF +201 ( PLI Interface transfer
OFFS : KF +150 to standard PC Interface
WZNR : KF +3 and then to PLC-Scale-module )
DBPC : KF +210
DBST : KF +208
WADB : KF +31 ??? notwendig ???
PREP : -M 164.5 HO561 DISCH REP
ENRE : -M 165.5 HO561 DISCH ROK
:***
F 4.6 = M 4.6 PLI_WATCHDOG-ALAR
F 0.1 = M 0.1 CONSTANT 1
F 4.1 = M 4.1 GLOB. MANUAL-MODE
F 0.2 = M 0.2 CONSTANT 0
F 164.5 = M 164.5 HO561 DISCH REP
F 4.7 = M 4.7 PLI_ENABLE_EXT_OW ext ownership for phase possible
T 155 = T155 HO561_DISCH DEL.RE HO561_DISCHARGE delay upload reports
F 42.7 = M 42.7 HO561 EOF DIS SI
F 59.6 = M 59.6 ABORT HO561_DISC *(6)
F 162.2 = M 162.2 HO561 UNIT_IDLE
T 175 = T175 HO561_DISCH DEL.PA HO561_DISCHARGE delay download parameter
F 165.5 = M 165.5 HO561 DISCH ROK enable reports
FX 201 = FX201 PLI_INTERFACE RSB
FX 104 = FX104 PHASE-L DISCHARGE
FX 203 = FX203 PLI->SCALE DISCHA
Segment 8 PLI BD560_CHARGE (blender BD560)
:DOU -FX201 PLI_INTERFACE RSB
Name :PLI
DBNR : KF +201
OFF : KF +200
ALAR : -M 4.6 PLI_WATCHDOG-ALAR
ENAB : -M 0.1 CONSTANT 1
OWNR : -M 4.1 GLOB. MANUAL-MODE Service-Mode ??
PARA : -M 0.2 CONSTANT 0
REPO : -M 164.6 BD560 CHARG REP TEST!!!
DBDX : -M 0.1 CONSTANT 1
ENOW : -M 4.7 PLI_ENABLE_EXT_OW
SB 200 -SB200 CALL PLI RSBatch C:ZONE10ST.S5D LEN=452
Page 6
TDUR : -T156 BD560_CHARG DEL.RE
:
:DOU -FX103 PHASE-L CHARGE
Name :PL-SS-CH
PLDX : KF +201
OFFS : KF +200
ADB : KF +30
EOSI : -M 0.1 CONSTANT 1
SC? : -M 0.2 CONSTANT 0 no scale
UNID : -M 162.3 BD560 UNIT_IDLE --------------------------------
PCOM : -M 170.0 BD560 CHARG CMP
TDDP : -T176 BD560_CHARG DEL.PA
:
:DOU -FX204 PLI->BLEND CH&DI
Name :P-BL C&D
PLDX : KF +201
OFFS : KF +200
PSTR : -M 60.0 STRT CHARG BD560
PACT : -M 60.1 CHARGE ACT.BD560
MADB : KF +30
REPO : -M 0.2 CONSTANT 0 TEST !!!!!
PREP : -M 164.6 BD560 CHARG REP
PCOM : -M 170.0 BD560 CHARG CMP
:***
F 4.6 = M 4.6 PLI_WATCHDOG-ALAR
F 0.1 = M 0.1 CONSTANT 1
F 4.1 = M 4.1 GLOB. MANUAL-MODE
F 0.2 = M 0.2 CONSTANT 0
F 164.6 = M 164.6 BD560 CHARG REP
F 4.7 = M 4.7 PLI_ENABLE_EXT_OW ext ownership for phase possible
T 156 = T156 BD560_CHARG DEL.RE BD560_CHARGE delay upload reports
F 162.3 = M 162.3 BD560 UNIT_IDLE
F 170.0 = M 170.0 BD560 CHARG CMP complete !
T 176 = T176 BD560_CHARG DEL.PA BD560_CHARGE delay download parameters
F 60.0 = M 60.0 STRT CHARG BD560
F 60.1 = M 60.1 CHARGE ACT.BD560
FX 201 = FX201 PLI_INTERFACE RSB
FX 103 = FX103 PHASE-L CHARGE
FX 204 = FX204 PLI->BLEND CH&DI
Segment 9 PLI BD560_MAN_ADD (blenderBD560)
:DOU -FX201 PLI_INTERFACE RSB
Name :PLI
DBNR : KF +202 ( PLI Interface )
OFF : KF +0
ALAR : -M 4.6 PLI_WATCHDOG-ALAR
ENAB : -M 0.1 CONSTANT 1
OWNR : -M 4.1 GLOB. MANUAL-MODE
PARA : -M 0.2 CONSTANT 0
REPO : -M 0.2 CONSTANT 0 no reports
DBDX : -M 0.1 CONSTANT 1
ENOW : -M 4.7 PLI_ENABLE_EXT_OW
TDUR : -T157 BD560_MA_AD DEL.RE
: --------------------------------
:AN -E 21.4=z10+b3.BD560-lid
:= -M 0.0 IND.ADDRES(DUMMY)
:
:DOU -FX106 PHASE-L MAN_ADD
Name :PL-SS-MA
PLDX : KF +202
OFFS : KF +0
MADB : KF +30
SB 200 -SB200 CALL PLI RSBatch C:ZONE10ST.S5D LEN=452
Page 7
EOSI : -M 0.0 IND.ADDRES(DUMMY)
LOAC : -M 61.5 LOCK ACTIVE BL
UNID : -M 162.3 BD560 UNIT_IDLE
TDDP : -T177 BD560_MA_AD DEL.PA
:***
F 4.6 = M 4.6 PLI_WATCHDOG-ALAR
F 0.1 = M 0.1 CONSTANT 1
F 4.1 = M 4.1 GLOB. MANUAL-MODE
F 0.2 = M 0.2 CONSTANT 0
F 4.7 = M 4.7 PLI_ENABLE_EXT_OW ext ownership for phase possible
T 157 = T157 BD560_MA_AD DEL.RE BD560_MAM_ADD delay upload reports
I 21.4 = E 21.4=z10+b3.BD560-lid lid closed BD 560
F 0.0 = M 0.0 IND.ADDRES(DUMMY)
F 61.5 = M 61.5 LOCK ACTIVE BL
F 162.3 = M 162.3 BD560 UNIT_IDLE
T 177 = T177 BD560_MA_AD DEL.PA BD560_MAM_ADD delay download parameters
FX 201 = FX201 PLI_INTERFACE RSB
FX 106 = FX106 PHASE-L MAN_ADD
Segment 10 PLI BD560_BLEND (blender BD560)
:DOU -FX201 PLI_INTERFACE RSB
Name :PLI
DBNR : KF +202 ( PLI Interface )
OFF : KF +50
ALAR : -M 4.6 PLI_WATCHDOG-ALAR
ENAB : -M 0.1 CONSTANT 1
OWNR : -M 4.1 GLOB. MANUAL-MODE
PARA : -M 0.2 CONSTANT 0
REPO : -M 165.0 BD560 BLEND REP
DBDX : -M 0.1 CONSTANT 1
ENOW : -M 4.7 PLI_ENABLE_EXT_OW
TDUR : -T158 BD560_BLEND DEL.RE
: --------------------------------
:DOU -FX105 PHASE-L BLEND
Name :PL-SS-BL
PLDX : KF +202
OFFS : KF +50
MADB : KF +30
EOSI : -M 60.3 BLE.TIME OVER BL
BLEN : -M 60.2 STRT BLEND BD560
UNID : -M 162.3 BD560 UNIT_IDLE
PREP : -M 165.0 BD560 BLEND REP
TDDP : -T178 BD560_BLEND DEL.PA
:***
F 4.6 = M 4.6 PLI_WATCHDOG-ALAR
F 0.1 = M 0.1 CONSTANT 1
F 4.1 = M 4.1 GLOB. MANUAL-MODE
F 0.2 = M 0.2 CONSTANT 0
F 165.0 = M 165.0 BD560 BLEND REP
F 4.7 = M 4.7 PLI_ENABLE_EXT_OW ext ownership for phase possible
T 158 = T158 BD560_BLEND DEL.RE BD560_BLEND delay upload reports
F 60.3 = M 60.3 BLE.TIME OVER BL
F 60.2 = M 60.2 STRT BLEND BD560
F 162.3 = M 162.3 BD560 UNIT_IDLE
T 178 = T178 BD560_BLEND DEL.PA BD560_BLEND delay download parameters
FX 201 = FX201 PLI_INTERFACE RSB
FX 105 = FX105 PHASE-L BLEND
Segment 11 PLI BD560_DISCH_NOP (blendBD560)
:DOU -FX201 PLI_INTERFACE RSB
SB 200 -SB200 CALL PLI RSBatch C:ZONE10ST.S5D LEN=452
Page 8
Name :PLI
DBNR : KF +202 ( PLI Interface )
OFF : KF +100
ALAR : -M 4.6 PLI_WATCHDOG-ALAR
ENAB : -M 0.1 CONSTANT 1
OWNR : -M 4.1 GLOB. MANUAL-MODE
PARA : -M 0.2 CONSTANT 0
REPO : -M 165.1 BD560 DI_NO REP no reports
DBDX : -M 0.1 CONSTANT 1
ENOW : -M 4.7 PLI_ENABLE_EXT_OW
TDUR : -T159 BD560_DI_NO DEL.RE
: --------------------------------
:DOU -FX102 PHASE-L DISCH_NOP
Name :PL-SS-DN
PLDX : KF +202
OFFS : KF +100
ADB : KF +30
EOSI : -M 0.1 CONSTANT 1 end by phase
REPO : -M 0.2 CONSTANT 0 no reports
UNID : -M 162.3 BD560 UNIT_IDLE
CEMP : -M 62.3 BD560 CHECK EMPT
PCOM : -M 170.1 BD560 DI_NO CMP
TDDP : -T179 BD560_DI_NO DEL.PA
:
:DOU -FX204 PLI->BLEND CH&DI
Name :P-BL C&D
PLDX : KF +202
OFFS : KF +100
PSTR : -M 62.1 STRT DINOP BD560
PACT : -M 0.2 CONSTANT 0
MADB : KF +30
REPO : -M 0.2 CONSTANT 0
PREP : -M 165.1 BD560 DI_NO REP
PCOM : -M 170.1 BD560 DI_NO CMP
:***
F 4.6 = M 4.6 PLI_WATCHDOG-ALAR
F 0.1 = M 0.1 CONSTANT 1
F 4.1 = M 4.1 GLOB. MANUAL-MODE
F 0.2 = M 0.2 CONSTANT 0
F 165.1 = M 165.1 BD560 DI_NO REP
F 4.7 = M 4.7 PLI_ENABLE_EXT_OW ext ownership for phase possible
T 159 = T159 BD560_DI_NO DEL.RE BD560_DISCHARGE_NOP delay upload reports
F 162.3 = M 162.3 BD560 UNIT_IDLE
F 62.3 = M 62.3 BD560 CHECK EMPT
F 170.1 = M 170.1 BD560 DI_NO CMP complete !
T 179 = T179 BD560_DI_NO DEL.PA BD560_DISCHARGE_NOP delay download param
F 62.1 = M 62.1 STRT DINOP BD560
FX 201 = FX201 PLI_INTERFACE RSB
FX 102 = FX102 PHASE-L DISCH_NOP
FX 204 = FX204 PLI->BLEND CH&DI
Segment 12 PLI BD560_DISCHARGE (blendBD560)
:DOU -FX201 PLI_INTERFACE RSB
Name :PLI
DBNR : KF +202 ( PLI Interface )
OFF : KF +150
ALAR : -M 4.6 PLI_WATCHDOG-ALAR
ENAB : -M 0.1 CONSTANT 1
OWNR : -M 4.1 GLOB. MANUAL-MODE
PARA : -M 0.2 CONSTANT 0
REPO : -M 165.2 BD560 DISCH REP no reports
DBDX : -M 0.1 CONSTANT 1
SB 200 -SB200 CALL PLI RSBatch C:ZONE10ST.S5D LEN=452
Page 9
ENOW : -M 4.7 PLI_ENABLE_EXT_OW
TDUR : -T160 BD560_DISCH DEL.RE
: --------------------------------
:DOU -FX104 PHASE-L DISCHARGE
Name :PL-SS-DI
PLDX : KF +202
OFFS : KF +150
ADB : KF +30
EOSI : -M 60.5 DIS.TIME OVER BL time over
REPO : -M 0.2 CONSTANT 0 no reports
UNID : -M 162.3 BD560 UNIT_IDLE
CEMP : -M 62.3 BD560 CHECK EMPT
PCOM : -M 170.2 BD560 DISCH CMP
TDDP : -T180 BD560_DISCH DEL.PA
:
:DOU -FX204 PLI->BLEND CH&DI
Name :P-BL C&D
PLDX : KF +202
OFFS : KF +150
PSTR : -M 60.4 STRT DISCH.BD560
PACT : -M 0.2 CONSTANT 0
MADB : KF +30
REPO : -M 0.2 CONSTANT 0
PREP : -M 165.2 BD560 DISCH REP
PCOM : -M 170.2 BD560 DISCH CMP
:*** no reports
F 4.6 = M 4.6 PLI_WATCHDOG-ALAR
F 0.1 = M 0.1 CONSTANT 1
F 4.1 = M 4.1 GLOB. MANUAL-MODE
F 0.2 = M 0.2 CONSTANT 0
F 165.2 = M 165.2 BD560 DISCH REP
F 4.7 = M 4.7 PLI_ENABLE_EXT_OW ext ownership for phase possible
T 160 = T160 BD560_DISCH DEL.RE BD560_DISCHARGE delay upload reports
F 60.5 = M 60.5 DIS.TIME OVER BL
F 162.3 = M 162.3 BD560 UNIT_IDLE
F 62.3 = M 62.3 BD560 CHECK EMPT
F 170.2 = M 170.2 BD560 DISCH CMP complete !
T 180 = T180 BD560_DISCH DEL.PA BD560_DISCHARGE delay download parameter
F 60.4 = M 60.4 STRT DISCH.BD560
FX 201 = FX201 PLI_INTERFACE RSB
FX 104 = FX104 PHASE-L DISCHARGE
FX 204 = FX204 PLI->BLEND CH&DI
Segment 13 PLI HO580_EMPTY (scale HO580)
:DOU -FX201 PLI_INTERFACE RSB
Name :PLI
DBNR : KF +200 ( PLI Interface )
OFF : KF +150
ALAR : -M 4.6 PLI_WATCHDOG-ALAR
ENAB : -M 0.1 CONSTANT 1
OWNR : -M 4.1 GLOB. MANUAL-MODE
PARA : -M 0.2 CONSTANT 0
REPO : -M 0.1 CONSTANT 1
DBDX : -M 0.1 CONSTANT 1
ENOW : -M 4.7 PLI_ENABLE_EXT_OW
TDUR : -T161 HO580_EMPTY DEL.RE
: --------------------------------
:DOU -FX100 PHASE-L EMPTY
Name :PL-SS-EM
PLDX : KF +200
OFFS : KF +150
WZNR : KF +4
SB 200 -SB200 CALL PLI RSBatch C:ZONE10ST.S5D LEN=452
Page 10
EMPY : -M 42.5 HO580 EMPTY-RANG
UNID : -M 162.1 HO580 UNIT_IDLE
TDDP : -T181 HO580_EMPTY DEL.PA
:***
F 4.6 = M 4.6 PLI_WATCHDOG-ALAR
F 0.1 = M 0.1 CONSTANT 1
F 4.1 = M 4.1 GLOB. MANUAL-MODE
F 0.2 = M 0.2 CONSTANT 0
F 4.7 = M 4.7 PLI_ENABLE_EXT_OW ext ownership for phase possible
T 161 = T161 HO580_EMPTY DEL.RE HO580_EMPTY delay upload reports
F 42.5 = M 42.5 HO580 EMPTY-RANG
F 162.1 = M 162.1 HO580 UNIT_IDLE
T 181 = T181 HO580_EMPTY DEL.PA HO580_EMPTY delay download parameters
FX 201 = FX201 PLI_INTERFACE RSB
FX 100 = FX100 PHASE-L EMPTY
Segment 14 PLI HO580_CHARGE (scale HO580)
:DOU -FX201 PLI_INTERFACE RSB
Name :PLI
DBNR : KF +200
OFF : KF +200
ALAR : -M 4.6 PLI_WATCHDOG-ALAR
ENAB : -M 0.1 CONSTANT 1
OWNR : -M 4.1 GLOB. MANUAL-MODE
PARA : -M 0.2 CONSTANT 0
REPO : -M 164.2 HO580 CHARG REP
DBDX : -M 0.1 CONSTANT 1
ENOW : -M 4.7 PLI_ENABLE_EXT_OW
TDUR : -T162 HO580_CHARG DEL.RE
:
:DOU -FX103 PHASE-L CHARGE
Name :PL-SS-CH
PLDX : KF +200
OFFS : KF +200
ADB : KF +41
EOSI : -M 42.3 HO580 EOF CHA SI
SC? : -M 0.1 CONSTANT 1
UNID : -M 162.1 HO580 UNIT_IDLE
PCOM : -M 0.2 CONSTANT 0 not used !
TDDP : -T182 HO580_CHARG DEL.PA
: --------------------------------
:DOU -FX202 PLI->SCALE CHARGE
Name :PLI-SC C
PLDX : KF +200 ( PLI Interface transfer
OFFS : KF +200 to standard PC Interface
WZNR : KF +4 and then to PLC-Scale-module)
DBPC : KF +210
DBST : KF +208
WADB : KF +41 ??? notwendig ???
REPO : -M 0.1 CONSTANT 1
PREP : -M 164.2 HO580 CHARG REP
:BE
F 4.6 = M 4.6 PLI_WATCHDOG-ALAR
F 0.1 = M 0.1 CONSTANT 1
F 4.1 = M 4.1 GLOB. MANUAL-MODE
F 0.2 = M 0.2 CONSTANT 0
F 164.2 = M 164.2 HO580 CHARG REP
F 4.7 = M 4.7 PLI_ENABLE_EXT_OW ext ownership for phase possible
T 162 = T162 HO580_CHARG DEL.RE HO580_CHARGE delay upload reports
F 42.3 = M 42.3 HO580 EOF CHA SI
F 162.1 = M 162.1 HO580 UNIT_IDLE
SB 200 -SB200 CALL PLI RSBatch C:ZONE10ST.S5D LEN=452
Page 11
T 182 = T182 HO580_CHARG DEL.PA HO580_CHARGE delay download parameters
FX 201 = FX201 PLI_INTERFACE RSB
FX 103 = FX103 PHASE-L CHARGE
FX 202 = FX202 PLI->SCALE CHARGE